gruva Posted August 11, 2008 Report Share Posted August 11, 2008 I recieved my Skyland today and it Quote Link to comment Share on other sites More sharing options...
jkirke Posted August 11, 2008 Report Share Posted August 11, 2008 the screws may be pressed into place. they may not have threads. i'm not sure about this, but i'm just assuming it might be like the SA i took the bezel off of. The bezel screws in it were just pressure fit. pulled right out with a pair of needle nosed plyers. don't quote me on the Skyland screws though. just a hunch. cheers~ Quote Link to comment Share on other sites More sharing options...
andreww Posted August 11, 2008 Report Share Posted August 11, 2008 According to Carlsbad Rolex the screws are press fit and for decoration only. Hopefully Josh will send you a few extras. Quote Link to comment Share on other sites More sharing options...
gruva Posted August 11, 2008 Author Report Share Posted August 11, 2008 The screws on my SFSO are screwed in and I tried one of those but it didn Quote Link to comment Share on other sites More sharing options...
TK471 Posted August 11, 2008 Report Share Posted August 11, 2008 This is good to know. Bottom line, be gentle until maybe the zig meister can glue them in permanently. Better than mine, though. The movement didn't work for [censored]. Had to go straight to a watchmaker. Which seemed easier than sending it back to China. Quote Link to comment Share on other sites More sharing options...
importr Posted August 12, 2008 Report Share Posted August 12, 2008 Yes it seems that the bezel screws vary from one model to another; my SuperOcean, the screws are threaded the Blackbird, pressed the BCE, I think they were pressed - as they are so tight with not a (screwdriver) mark on the slotted head - it'd have to be pressed? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.