klocklind1 Posted September 25, 2008 Report Posted September 25, 2008 Does anyone know if I can put a Pam 177 sandwich dial in a Pam 0036 case ? Is the case the same on the Pam 177 and Pam 0036 ? AND Is the Pam 111 dial and Pam177 dial exactly the same ?
V Posted September 25, 2008 Report Posted September 25, 2008 Does anyone know if I can put a Pam 177 sandwich dial in a Pam 0036 case ? Is the case the same on the Pam 177 and Pam 0036 ? AND Is the Pam 111 dial and Pam177 dial exactly the same ? The 36 case has markings ON the case (serials etc..) so it will make it wrong for the 177.
klocklind1 Posted September 25, 2008 Author Report Posted September 25, 2008 The 36 case has markings ON the case (serials etc..) so it will make it wrong for the 177. BUT will the case be the same if You do not care about the printing on the case ?
gianton Posted September 25, 2008 Report Posted September 25, 2008 Yes it's the same. AND Is the Pam 111 dial and Pam177 dial exactly the same ?
fishgodeep Posted September 25, 2008 Report Posted September 25, 2008 Not always ...the 036 from Ruby / Joshua (with fat crown and flatter CG )has a much thinner dial and when I attempted to fit a 177 sandwich dial in the case it doesn't allow the stem to line up with the tube + the case clamps cannot be tightened... Best FGD
klocklind1 Posted September 26, 2008 Author Report Posted September 26, 2008 Thanks for the info. It is still a replica so I think You NOT be sure when You mix different cases and so on. Not always ...the 036 from Ruby / Joshua (with fat crown and flatter CG )has a much thinner dial and when I attempted to fit a 177 sandwich dial in the case it doesn't allow the stem to line up with the tube + the case clamps cannot be tightened... Best FGD
mikerblade Posted September 26, 2008 Report Posted September 26, 2008 Not always ...the 036 from Ruby / Joshua (with fat crown and flatter CG )has a much thinner dial and when I attempted to fit a 177 sandwich dial in the case it doesn't allow the stem to line up with the tube + the case clamps cannot be tightened... Agreed, I have the same caseset with my 172, there's no way you can fit a sandwich dial in there without serious work, still Its a easy spot as its the only rep Ti case I have ever seen with stamped OP & serial #'s on the case.
klocklind1 Posted September 26, 2008 Author Report Posted September 26, 2008 OK But my case is NOT with an engravement on the case, ONLY the caseback !!! So I do not know if I want to buy a separate 111 sandwich dial and try it to that it will not ??????????? Agreed, I have the same caseset with my 172, there's no way you can fit a sandwich dial in there without serious work, still Its a easy spot as its the only rep Ti case I have ever seen with stamped OP & serial #'s on the case.
PAMman Posted September 26, 2008 Report Posted September 26, 2008 If you have a 036 without the serial numbers on the lugs you may actually have a 036 type dial in a regular 176 / 177 case. Probably well worth a try if you can get a sandwich dial easily. If it doesn't work then you can always sell the dial again.
klocklind1 Posted September 27, 2008 Author Report Posted September 27, 2008 Thanks for that ! I will try it ! If you have a 036 without the serial numbers on the lugs you may actually have a 036 type dial in a regular 176 / 177 case. Probably well worth a try if you can get a sandwich dial easily. If it doesn't work then you can always sell the dial again.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now