rolexconfuse Posted November 13, 2008 Report Share Posted November 13, 2008 I have the Asian ICH version of the GMT II Ceramic (not the new Full ceramic), anyway the watch runs fine. Kept perfect time and never had a problem with it (except for the GMT hand stopping from time time). 2 months ago I stopped wearing my watch because I lost the screw that held the band to the buckle. I didn't notice until my watch fell to the ground. Now watch still worked, no scratches on the bezel, band, or case. Watch winds fine, date wheel changes with no issue, crown screws in smoothly. So I did not touch the watch for 2 months. I finally found a spare screw that would work with the watch so I started to wearing the watch this week. Everything works but all of the sudden the crown sticks (it never stuck in the past) and it's a nightmare to unscrew. At first i thought that the gasket was causing the problem but the rubber seal did not move and it does not appear to be damaged. There's no direct on the crown threads so i don't understand what's causing the crown to stick now? Link to comment Share on other sites More sharing options...
freddy333 Posted November 13, 2008 Report Share Posted November 13, 2008 The crown unscrewing/screwing occurs between the crown & crown tube So, most likely, the fall bent or damaged the tube and/or its threads. But the only way to know for sure is to open the case, release/remove the stem/crown & inspect the threads. Link to comment Share on other sites More sharing options...
rolexconfuse Posted November 13, 2008 Author Report Share Posted November 13, 2008 wow, i guess that could be a possible but when the watch fell it fell on the the watch face and the crown was screwed on tight. Is it possible that the shock of the fall did something to the threads? The crown unscrewing/screwing occurs between the crown & crown tube So, most likely, the fall bent or damaged the tube and/or its threads. But the only way to know for sure is to open the case, release/remove the stem/crown & inspect the threads. Link to comment Share on other sites More sharing options...
freddy333 Posted November 13, 2008 Report Share Posted November 13, 2008 You say the crown problem began after you started wearing the watch again subsequent to its having been dropped. What do you think the problem is? Link to comment Share on other sites More sharing options...
involt Posted November 13, 2008 Report Share Posted November 13, 2008 The same thing happened to my brother's Explorer II, but with no previous shock. He hadn't worn the watch for two months too, and neither the crown, not the tube (or the O-ring) seemed to be damaged. I forced the crown after having wrapped a soft cloth around it; then I lubricated the tube, and the problem was solved. The only reasonable assumption I can put forward is a manifestation of the thermal expansion of the crown. Link to comment Share on other sites More sharing options...
rolexconfuse Posted November 13, 2008 Author Report Share Posted November 13, 2008 That is crazy but i guess I'll try lubing it and see what happens The same thing happened to my brother's Explorer II, but with no previous shock. He hadn't worn the watch for two months too, and neither the crown, not the tube (or the O-ring) seemed to be damaged. I forced the crown after having wrapped a soft cloth around it; then I lubricated the tube, and the problem was solved. The only reasonable assumption I can put forward is a manifestation of the thermal expansion of the crown. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now