2005SUBMARINER Posted January 24, 2009 Report Share Posted January 24, 2009 hello guys i have a steelfish with a china 2813 movement .. it works fine but i can feel the power reserve wind as i screw in the crown . is the stem to long or to short ? thanx in advance .. Quote Link to comment Share on other sites More sharing options...
Rolexman Posted January 25, 2009 Report Share Posted January 25, 2009 Too long! Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted January 25, 2009 Report Share Posted January 25, 2009 yep too long Quote Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted January 26, 2009 Author Report Share Posted January 26, 2009 THanx guys ! i thought it was something like that .. Quote Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted January 26, 2009 Author Report Share Posted January 26, 2009 (edited) how would that affect the watch ? should i cut it down to size ? Edited January 26, 2009 by 2005SUBMARINER Quote Link to comment Share on other sites More sharing options...
RWG Technical Posted January 26, 2009 Report Share Posted January 26, 2009 It could also be your crown not disengaging from the stem. Your not going to damage anything with this problem, I would leave it alone. You shouldn't be handwinding your auto's anyway RG Quote Link to comment Share on other sites More sharing options...
deltatahoe Posted January 26, 2009 Report Share Posted January 26, 2009 Your not going to damage anything with this problem this is encouraging -- i've been meaning to pose this question for a while now, as the same thing happens with one of my gens deltatahoe Quote Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted January 26, 2009 Author Report Share Posted January 26, 2009 THANK you mr The Zigmeister .. i appreciate your help . Quote Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted January 31, 2009 Author Report Share Posted January 31, 2009 Hey guys can you please please to me where to buy a uncut stem for a china dg2813 .. thanx man .. i have new in the pack eta stems but they wont work with the china movement . Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted January 31, 2009 Report Share Posted January 31, 2009 Have you checked if the crown spring mech is working first before you replace the stem, remove the crown and stem and see if the part where the stem screws into, copmresses into the rest of the crown, I am assuming that this steelfish did not always wind the rotor, But then again just do what Z says and leave it. Quote Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted January 31, 2009 Author Report Share Posted January 31, 2009 crown does compress , stem broke looking to buy new uncut stem for dg2813 .. thanx ., Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.