fellfell Posted July 29, 2006 Report Share Posted July 29, 2006 Dear friends I would want to replace the bezel of to my sub replica with to bezel more beautiful that have seen in this site http://www.ofrei.com/page_151.html#2533 But I do not know as to make in order to remove the bezel old without to ruin or to rigare the watch and in Italy watch rpairs and jewelers do not make repairs on replica watch Have you conseils for me to remove bezel ? Thank you for help, good day Quote Link to comment Share on other sites More sharing options...
Bignasty Posted July 29, 2006 Report Share Posted July 29, 2006 Most bezels simply "pry" off with a case opening knife while taking precautions not to scratch/bend the bezel and or the case. You can use tape to mask off the areas you will be prying upon. Also depending on the the type of bezel (unidirection, ratcheting, etc) there may be a spring and or parts that could potentially fly off if you don't remove the bezel slowly. If you've never done it i would recommend picking up some cheap watches with similar bezels to practice. Also on the insert. The diameters could be too small or too large or both for a rep watch. Even if you figure out how to get the bezel off the replacement may not fit without modification. So pick up a set of precision calipers and measure both the diameters before ordering. If the measurements are too large you can always file it down! Good luck and have fun! Cheers, Jon Quote Link to comment Share on other sites More sharing options...
MAHLER Posted July 29, 2006 Report Share Posted July 29, 2006 Dear friends I would want to replace the bezel of to my sub replica with to bezel more beautiful that have seen in this site http://www.ofrei.com/page_151.html#2533 But I do not know as to make in order to remove the bezel old without to ruin or to rigare the watch and in Italy watch rpairs and jewelers do not make repairs on replica watch Have you conseils for me to remove bezel ? Thank you for help, good day http://www.vikbobil.se/bezel.html If you see that is difficulty ask help to a watchmaker. Quote Link to comment Share on other sites More sharing options...
fellfell Posted July 29, 2006 Author Report Share Posted July 29, 2006 Dear Bignasty, thank you for your conseil. Good day Dear Mahler, thank you for your good pics. Good day Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.