Replace Bezel Rolex Replica

[fellfell]

Dear friends

I would want to replace the bezel of to my sub replica with to bezel more beautiful that have seen in this site

http://www.ofrei.com/page_151.html#2533

But I do not know as to make in order to remove the bezel old without to ruin or to rigare the watch and in Italy watch rpairs and jewelers do not make repairs on replica watch

Have you conseils for me to remove bezel ?

Thank you for help, good day

[Bignasty]

Most bezels simply "pry" off with a case opening knife while taking precautions not to scratch/bend the bezel and or the case. You can use tape to mask off the areas you will be prying upon. Also depending on the the type of bezel (unidirection, ratcheting, etc) there may be a spring and or parts that could potentially fly off if you don't remove the bezel slowly.

If you've never done it i would recommend picking up some cheap watches with similar bezels to practice.

Also on the insert. The diameters could be too small or too large or both for a rep watch. Even if you figure out how to get the bezel off the replacement may not fit without modification. So pick up a set of precision calipers and measure both the diameters before ordering. If the measurements are too large you can always file it down!

Good luck and have fun!

Cheers,

Jon

[MAHLER]

Dear friends

I would want to replace the bezel of to my sub replica with to bezel more beautiful that have seen in this site

http://www.ofrei.com/page_151.html#2533

But I do not know as to make in order to remove the bezel old without to ruin or to rigare the watch and in Italy watch rpairs and jewelers do not make repairs on replica watch

Have you conseils for me to remove bezel ?

Thank you for help, good day

http://www.vikbobil.se/bezel.html

If you see that is difficulty ask help to a watchmaker.

[fellfell]

Dear Bignasty, thank you for your conseil. Good day

Dear Mahler, thank you for your good pics. Good day