alanytical Posted March 4, 2009 Report Posted March 4, 2009 Just posted today. You think it's another Skyland blacksteel? Why another one though? Let's hope it's not supposed to be the Super Avenger Blacksteel. http://www.jpc8118.com/0480-p-5774.html
alanytical Posted March 4, 2009 Author Report Posted March 4, 2009 Alright, I'm guessing it's the first maker of the PVD Skyland getting the blacksteel coating right and re-releasing it as an updated version.
elisiX Posted March 4, 2009 Report Posted March 4, 2009 God I wish he'd lose that bloody watermarking on his new pictures. Looks terrible. Like the pictures weren't bad enough. Not sure what is supposed to be 'new' on this? Looks like a V2 Skyland BS to me.
AllergyDoc Posted March 4, 2009 Report Posted March 4, 2009 (edited) God I wish he'd lose that bloody watermarking on his new pictures. Looks terrible. Agreed. The watermarking is bad. Edited March 4, 2009 by AllergyDoc
Samurai Posted March 4, 2009 Report Posted March 4, 2009 Josh says that there are already 5-10 clones of his perfect clones site.....hence the watermarks....
bwhitesox Posted March 4, 2009 Report Posted March 4, 2009 bwhitesox says the watermarking sucks balls
babola Posted March 4, 2009 Report Posted March 4, 2009 Alright, I'm guessing it's the first maker of the PVD Skyland getting the blacksteel coating right and re-releasing it as an updated version. Yup, you're right, it has all the tells of a V1&V3 S/S skyland from a non-Hublot maker...better defined crown, wider lugs, wider numbers and hash marks on bezel, longer chrono pushers, lighter red colored hands, exposed metal on stem posts on three small register hands, B13 mov't engraving on the mov't rotor, slightly worse lume dot on bezel 12 o'clock rider tab....etc I'd say you're pretty much on the money with your guess...let's just hope the price will also follow lines of a more affordable V1/V3 S/S version.
Mickey Padge Posted March 4, 2009 Report Posted March 4, 2009 100% V1 maker, hopefully with a V1 maker price Competition will help lower prices, unless this goes up at +$400 too
andreww Posted March 4, 2009 Report Posted March 4, 2009 I'm almost certain that this is the V1/3 Skyland with a proper DLC coating. Look at the difference in the pearls (V2 is more accurate) as well as how much closer the numbers on the bezel come to the outer edge on the V2 (also more accurate). Also, the rubber strap on the new one is the old cheap version which is what comes with the V1/3. Should be interesting to see the price on this one. It should make this watch more accessible to those that can't afford to drop $500 on a rep. I'm hoping that we'll see this in the sub $250 range. V3 Skyland BS V2 Skyland BS
alanytical Posted March 4, 2009 Author Report Posted March 4, 2009 It looks like both makers hired the same lume dot appliers with shaky hands.
andreww Posted March 4, 2009 Report Posted March 4, 2009 It wouldn't surprise me at all if they shared the same dial manufacturer.
Fidestro Posted March 4, 2009 Report Posted March 4, 2009 I can't see this in the $250 or below range as andreww hoped for above. I can see it being slightly lower but if they priced it at $350 then it would still be significantly cheaper than the other and they would have a higher profit. I can't see them cutting the price too low and leaving that much on the table.
andreww Posted March 4, 2009 Report Posted March 4, 2009 The SS version can be had for $180. DLC costs $200 per watch???
Fidestro Posted March 5, 2009 Report Posted March 5, 2009 The SS version can be had for $180. DLC costs $200 per watch??? You are trying to find logic in the rep watchmaker, and there is none to be found. In the standard Skyland line the v3 is only $50 bucks or so cheaper than the v2, so why should the v2 be so much more expensive in DLC? PROFIT! And you can't tell me the v2 costs $50 bucks more than the v3 to make in the standard stainless either. You can't say that DLC "costs" $200, but they don't have a problem charging it.
babola Posted March 5, 2009 Report Posted March 5, 2009 The SS version can be had for $180. DLC costs $200 per watch??? Yeah, the V3 $180 Skylands are now gone (unless D4M organises another crazy group buy deal any time soon)...they start about $210 these days. So if the more expensive V2 that sells for about $270 now, costs $420 in 'blacksteel' version, the cheaper $210 V3 would be just about right at the $350+ range, but let's wait and see
Fidestro Posted March 6, 2009 Report Posted March 6, 2009 Price is up, $328. This one is NOT DLC it is still PVD, so other than the dial I don't know why they bothered.
Mickey Padge Posted March 6, 2009 Report Posted March 6, 2009 Price is up, $328. This one is NOT DLC it is still PVD, so other than the dial I don't know why they bothered. Well, they didn't make the watch any worse did they? The PVD looks a shade lighter, and the pushers are no longer gloss black either...... You can't complain about improvements, maybe the $60 price increase, yes....
Fidestro Posted March 6, 2009 Report Posted March 6, 2009 They did not need to make this because the v2 maker already set the bar high enough to where ANOTHER PVD one would still be looked upon as inferior.
Mickey Padge Posted March 6, 2009 Report Posted March 6, 2009 They did not need to make this because the v2 maker already set the bar high enough to where ANOTHER PVD one would still be looked upon as inferior. They already made the V1 blacksteel, and before the V2 was released as well. I see no reason why the improvements to an already manufactured watch aren't a good thing for us, the only downside is the completely unjustified price increase.... Never complain about improving the quality of any watch, how does complaining about that help our hobby? I wish the factories spent more time trying to improve their creations This is a good option for those wanting to save some cash over the more expensive V2
Fidestro Posted March 6, 2009 Report Posted March 6, 2009 The v2 was justified as they got the coating right. This is a slap in the face as although it is an improvement it is still the wrong type of coating all together and yet they found it necessary to jack the price up higher.
Mickey Padge Posted March 6, 2009 Report Posted March 6, 2009 No argument, the price should have stayed the same, I never said otherwise The improvements are great though and should be welcomed, the price bump is the slap in the face..... But at least the factory are actively improving their product, maybe a non cartel dealer will not bump up the price?
Fidestro Posted March 6, 2009 Report Posted March 6, 2009 I suppose what really bothers me about this is that the effort was wasted when it would have been better spent making a new watch, say the IWC Mark everyone has been clamoring for forever.
babola Posted March 6, 2009 Report Posted March 6, 2009 Let's not jump into conclusions yet, Andrew calls both V2 and V3 Blacksteel models "PVD", although we know the V2 isn't PVD. So before someone acquires one and confirms the actual finish with the dealer/factory etc, let's keep the hope up ...oh, and the cheaper "V3" model Skylands have many things going for them, not only the dial print.
Mickey Padge Posted March 13, 2009 Report Posted March 13, 2009 This updated V1 Blacksteel is now only $258, maybe they read this thread http://www.tt88time.com/index.php?main_pag...roducts_id=3200 Seems to be a fantastic deal, I hope it's the start of a new trend, with price drops across the range, the V2 is reduced too!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now