ayrtontre Posted April 1, 2009 Report Share Posted April 1, 2009 hi i want put an original sub dial on eta mov and sombody telll me 2892 mov have same hole pins. but this is wrong. is possible or i must drill new holes on mov? reg Quote Link to comment Share on other sites More sharing options...
Bricciola Posted April 1, 2009 Report Share Posted April 1, 2009 Hello look here, http://www.rwg.cc/members/serti-black-dial...amp;hl=datejust Quote Link to comment Share on other sites More sharing options...
alligoat Posted April 1, 2009 Report Share Posted April 1, 2009 I think you're going to have to either drill new holes, or remove the dial feet. Rosnik isn't very clear in his post, but if you go to julesborel.com and look under mechanical watch movements at the 2892, you will see that the position of the dial feet appears to be around 2:30 and 8:30. Roelx dial feet are 2:30 and 7:30 approximately. You might be good on one, but not both. Most people just remove the feet and glue the dial to the top spacer ring and in turn glue the ring to the movement. Quote Link to comment Share on other sites More sharing options...
rosnik Posted April 1, 2009 Report Share Posted April 1, 2009 The picture on my post referred are about 12892 , no 2892 Eta. The 12892 is 12.5 lines and the 2892 is 11.5 lines, so he need spacer to fit gen case. Wile, I know for sure ( I got another Dj whit 2892 too ) that DOMENICO can do that work on 2892 too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.