altesporsche

Looking forward seeing the build ! Im starting my second now (big red) l also have a 726 powered Newman dial.

Been wanting something like this to be released for a while !  

Anyone one know of any factory planing on the 42mm ? 

15 minutes ago, homecd said:

Beautiful.  I assume the difference between v1 nd v2 dials is minimal.

Apparently there is a “v2” due out in March some time, but I was told by Toro that this is it.. but we will see 

just received this today from Toro ! Who I may add is awesome !  Always top notch service with him ! Ordered my watch the weekend and have it today 😎 

secondly just in quick observations I have to say these watches have come a lone freaking way! Only one of my end links has any gap whatsoever and it’s small. The other side is perfect ! 

Everyone gets on about the dial etc.. it’s actaully pretty damn good quality wise, yes the sub dials may be slightly fat but u less you are looking for it you won’t see it and the font it off but really on the wrist no way to actually see this in reality. I will change out for the ARF dial when I locate one but in all honesty there are next to no one in the general public even experienced Rolex fellas that would call this out on the wrist. Maybe a few of us here knowing what to look for would quite quickly but the likelihood anywhere else is slim. 

I think its a great step forward for the market and hobby. 

I’ll be messing with this a bit so I’ll be posting as I progress with the quest to perfection. 

15 hours ago, jackflash said:

Don’t think you need to do much at all to the watch, just a little insert ageing. Most gens still in existence don’t look like they‘ve seen much action. Less is more

Yea I’m going to only make some subtle aging to the whole watch, nothing serious. I think it’s good enough to not be masked by excessive wear that you will rarely see in the genuine watches. 

Yea I’m actually pleased to see she is selling them again. As I mentioned before, she told me she didn’t have them anymore. 

I was wanting to get a project started for a custom one. 

But this is damn good! Maybe a serifs are minutely less than the gen but overall this is the best I’ve seen. 

And yea my watch needs a lot of aging overall lol it’s the only thing I’ve not done yet. Can’t decide how far to take it. 

Yea it didn’t take long lol I’m anal about waiting so I got her to express it to me lol 

It’s quite a lot better than the Phong, the numbers are the correct size and the 5 min markers aren’t as fat and a bit longer reaching to the edges as it’s supoosed to. 

Here are some photos, in my watch is a ruby insert but it’s not been massaged yet so a little too crisp for the watch. The photo of the insert alone is a phong with my own pip and aged to take away some of the black above and below the numbers to make it look better vs. The stock ruby insert. 

Received my Ruby inserts today ! They look amazing compared to the phong version. When I get it sorted I’ll post a photo. 

Here is mine using a Vietnam case, custom dial/hands, gen 1520 movement, gen crown and stem and a phong insert. 

19 hours ago, jackflash said:

I’ve ordered this one from Ruby.

http://rubyswatch.com/products/k15-|-submariner-|-5517-|-bezel-insret-1878

 

Looks like the numerals are better than the Phong I currently have installed.

 

 

What seconds hand are you using ? Seems more correct than mine. 

48 minutes ago, jackflash said:

Yeap, that’s what I paid. I’ll post some shots on arrival. It’ll take a few weeks though with the snail-mail.

Just ordered two and waiting for her to get back to me.  One to sacrifice to test the aging of it and one to be a working one. 

If it shows up and it’s the same as the photos, these are currently the best 5517 on the market. 

10 hours ago, jackflash said:

I’ve ordered this one from Ruby.

http://rubyswatch.com/products/k15-|-submariner-|-5517-|-bezel-insret-1878

 

Looks like the numerals are better than the Phong I currently have installed.

 

 

She has them again ??????? She told me she didnt have them anymore. Phongs are not so great and the numbers are too small... good enough but not so good. 

Ugh the damn 5517 lol been a while building mine. Down to a good insert quest now. Good luck this build can be a heart breaker. 

6 hours ago, hunvaakaren said:

 

 

Really nice, is it a phong build?
What does the v726 go for these days?


Sent from my iPhone using Tapatalk

 

 

Phong/MQ/custom and gen. The 726 is quite costly now, I actually bought this as a base with a 726 in it. I would say they are in the $4k range for the most part, may luck into one for less. But they are a stunning movement ! 

Just look at this sexyness below 🤤

26 minutes ago, hunvaakaren said:

 

 

Pictures of your 6263?


Sent from my iPhone using Tapatalk

 

 

I have a gen 702 crown for it as well, just not had time to install it. 

The prices on the movements are gone insane lol 

inhave a 726 powered 6263 and I love it ! It is a really nice looking movement and runs at the same rate as the 727, however they have gone stratosphereic in price recently ! 

Automatico is right on the lunacy lol I paid 3k two months ago for a 1575GMT and now they are nearly $2grand more lol it’s getting out of control lol kinda like the genuine Rolex market. 

if you have a good V72 use it ! I wouldn’t dump the $4-5k for a 726 and surely not the $6500 for a conversion (although I likely will at some point lol) already looking for a lined bridge. 

Oh my I’m lost for words.. I know he wasn’t well but I wasn’t aware that he had passed. 

RIP to a great man ! Rolf was a good fella in the years I’ve been in contact with him. I’m really sorry to hear of this. 

I know exactly what you are taking about automatico, that’s exactly the situation here. The case screws don’t screw in enough to clear and allow the movement to clock into place then unscrew to hold the case. 

Ill give it another go when I get gone in a few days and take some photos, but it looks like the grove needs to be machined a bit to use clamps correctly. 

On 1/3/2019 at 3:53 AM, jimcon11 said:

I've actually had the exact same issue on my 6538 case from Ruby taking a FEF390. I don't find it too egregious since very few Tudor subs were put into 6538 cases and it's possible that the movements were specially machined. 

 

I think just shaving down the slots where the movement tabs screw in should solve the problem.. kinda kills the resale value of the movement though.

Yea I’m not shaving the movement at all lol the 1575s are In the $3k range now and sparse, I’d rather hack a case up than a movement that’s hard to replace. 

Yea that’s the problem, I bought it from someone else. 

If i machine it, it will only likely be .25mm or less to make it work. 

Its just odd for a “gen spec” case set lol arrr !! My luck. 

Hey fellas, 

anyone try to fit a gen 1570 into a Phong 1655 case ? 

Just breifly did did a few days ago when I was home for a brief few hours lol 

but it didn’t seem to fit, the movement seemed to reach too far back (by a slight amount) to not allow the case screws to keep the movement in there. 

Using a gen dial plate etc.. so I figured it would fit. 

Anyone have this happen in the past ? 

18 hours ago, Nanuq said:

This old thing???

 

 

 

 

That thing is freaking beautiful !!! I think that’s the next one I want to build. 

Nice one ! 

Jesus I just paid $3k for my 1570 GMT movement in mint condition. 

Nice review ! Thanks for taking the time to write it ! The watch looks great ! 

Been thinking about the white and black dial person (the Newmanish looking dial)

Lol I hear you ! Parts were a lot cheaper 5+ years ago, if I was where I am now but back then lol I’d have a lot of crazy builds 😂 the biggest cost these days now is the 1570 movement or even converting to gmt. The 1570 gmt (this is what I’m using) is $3-3500 these days and a set of genuine hands are $2k (I paid a lot less for my hands) 

its still a shit ton of fun to build, chasing parts etc. 

Hey fellas, 

been a while since, I posted any build stuff. Been letting the bank cool off and collecting more parts for more builds. This one I’m particularly excited about. 

Been wanting a 1655 for a long time and well where the prices have gone I doubt I’ll be paying $20g for gen watches anymore with children and a warden in the picture lol 

however it was an excuse to build a kick ass franken ! When I’m done it will be a North worth buying gen type of deal lol I’m nearly into $6000 for this build now with buying a phone build to scrap for a better life. 

Case set is a phong 1655 2.9mil serial. The dial is a custom Vietnam frog foot rail dial that I’m still waiting on, it’s not correct to the serial date of 72’ ish as the rail dial appeared in 74’. 

The heart beat will be a crispy fresh serviced genuine 1570 Rolex movement. 

Genuine unused mint tritium hand set

Genuine unused 25 - 116 plexi 

Genuine crown and tube (used) 

Genuine open 6 & 9 closed 26 silver date wheel minty fresh 

Really excited to get this out together, only missing the dial right now. Canada post is on strike so it’s taking forever to get here. 

Any criticism is greatly appreciated as these watches do have variance over the production years so minute details may be missed.