Having bought Narikaa's strap adjusting toolkit I then bought a movement holder £5, finger puller £3, tiny bottle of meobius oil £3, one drop auto oiler £2, glass fibre pen £3 and attacked my 30yr old watch from my teens....... It wouldn't go and is worthless so I had the perfect victim. It now runs and keeps good time! there was a speck of black ? in between two teeth of the cog driven by the main spring. My question is, how do I get the oil from the tiny bottle into the oiler ? the oiler is a plastic tube with a screw on cap at each end , one end has a tiny metal tube sticking out, if I tip the oil bottle upside down it just sits there without pouring, I dipped the tube in the end to oil the watch ( prob messed that bit up but it is at least running ).
Some pics....the movement is REMEX 2641 made in HONG KONG one jewel ( but I found three, one either end of the balance and a single one under the wheel that goes into the escapement). I found the hardest bit was putting the date wheel back together as there is a tiny ratchet that keeps flying apart when you put the plate over it.
Uncased ready to start,
The other side
Fingers off and dial off
Datewheel off
Front empty
Balance wheel out
Bridge removed
Improvised parts holder, it was a container of blank cd's but the bottom spacer is divided into handy sections and there's a plastic cover for the whole thing to keep dust off.
Finally the watch back together and running