hazey

I thought it would be a good idea to get a poll going on this. I have contacted my dealer Andrew@ Perfect Clones and he is in denial about this issue claiming he has sold over 200pc with no complaints. Hopefully if we get enough votes I can forward this to him.

Mine has faded quite bad and it will only get worse I believe. Can we put something together and request the dealers resolve. Also open to suggestion on the matte clear coat. I have no experience doing this would it need to be a certain type of spray or nozzle to get the right finish.

Couldn't find a link in the Trusted Dealer's section so here it is www.p-cls.com

Thanks guys. Joshua is sending me a replacement hand and even the pearl. Would I be able to change the pearl without removing the bezel. I also contacted MD2020 and he said he will sort both issues out for me. once that is done I will be real happy as this is a really good rep

Will they ever fix the hour markers so they are sharp and with straight lines? how much more are these noob versions over the current CrPO

Well looks like I don't have much luck. Looks like some of my pearl lume has fallen out! Now this is what is strange. Its like the lume is not sealed, ie it has a chalky residue. If I get a pin and touch it the powdery residue falls out. Not very happy now Suggestions

Received my watch and there is a mark on the seconds hand If you look at the 3rd QC pic above you can see it, Its actually pretty noticeable. Anyone know what my options are? Dont really want to send it back and risk getting a replacement flaw. Would getting genuine hands be the way to go? Anyone got a caseback number I can search parts by

This is not good to see as I have just purchased mine! Held off till they fixed the AR and LM engraving, perhaps I should have waited a little more. Would the dealers send out upgraded bezels when released?

Cool, I have approved. I am real picky and last time I picked up a mark on my UPO in QC but I was assured it was fine, sure enough it was a yellow blemish on the silver part of bezel that could not be removed. Can't wait to recieve. Also waiting on my relume job of my UPO

Hi all Recieved my QC pics what do you think? Looks like Ive got a good pearl and the only potential issues I can see are below the 30 on bezel and some of the the screw links look like they are maybe dented from the screw driver? Thoughts Thanks

Looks like some scratch or glue on the chrome part of bezel at 20 and agree on the pearl pushed in top left.

Anyone know if they will be making the new ceramic version. I prefer the look if that. If it ends up coming out with corect arrows on G then I'm sold http://www.tagheuer.com/int-en/home#/int-en-luxury-watches-aquaracer-500-m-calibre-16automatic-chronograph43-mm-black-steel-bracelet-cak2110-ba0833

This is just wanted to hear! Great. Did you put a direct light on it or was it just using the room light source. Also say you walk into a lift or bus does is light up at all?

Ok found the part numbers. Turns out to get gen dial hands and ebay bezel insert with shipping im up at 300+ thats close to a new ceramic PO. Question is will I be happy with the lume or will it be the same as my current PO

Thanks. Ive had my eye on the ceramic but holding out for the next version. What could i sell it for you think? It has the swiss eta. Also ive been trying to locate the thread with all the gen part numbers so i can get prices on gen dial from cousinuk site. I believe it was linked in a franken guide thread. Cheers

Hi Everyone, first time poster here, I have been doing a lot of reading on here and read some great reviews etc. I have a UPO I purchased from Joshua about just over 1 year ago and would like some help with regards to repairs and upgrades. Firsty I had an unfortunate accident and Knocked the bezel. It looks a lot worse in person and it has even cracked some of the pearl. The yellow mark was there when I recieved the watch and even in the QC pics, but I was assured it was just the pics (anyway, pointless now). What are my options for replacement. I've read that gen needs to be modded. A direct replacement would be ideal for me. Also something with the correct pearl and positioning would be a bonus,otherwise I'm just happy with a direct replacement like I have but Joshua says they dont make it anymore so he cant help. I've seen the ones on ebay from wholesaleoutlet990 but worried about the pearl, it looks too high. Which one is the correct one? as there appears to be 2 listed with a $10 price difference. A 45mm for $28 and the 2208.50 45mm for $39 Secondly I have lost the end of this pin, not sure what its called. Anyone know where I can get a replacement And lastly I would like to do the following upgrades 1. Lume upgrade - I am located in Australia. Can someone recommend who does relume jobs and the approx cost. Is this the right option for me given that I would like the markers, hands and pearl lume to be as strong as gen. (to light up when walking into a room or lift after being outside) Currently my hands are stronger than the markers but I have to use a torch or be in direct strong sun light 2. Bezel/Pearl upgrade only because it is damaged now as per above 3. What is recommended for removing scratches from the bracelet, while maintaining that brushed matt silver finish. And where would be the best place to get these items fitted, Can it be any watchmake, do they need to spealise in swiss, i'm just worried about it being flagged as a rep. Many thanks