signumboy Posted July 22, 2009 Report Share Posted July 22, 2009 I've a p/o from eurotimez with a asian clone movement ,the gold one with 25 jewels runs about 30 seconds per day fast I've tried to regulate it by moving the ajuster back but it makes no difference. I read on wiki that some of these asian movements the ajuster is for show . any help please. Link to comment Share on other sites More sharing options...
capice Posted July 22, 2009 Report Share Posted July 22, 2009 TAke a look in the Watchmaking Resource Center at the How to..............or on RG watchmodforum Link to comment Share on other sites More sharing options...
fakemaster Posted July 23, 2009 Report Share Posted July 23, 2009 It's not for show on that movement. Link to comment Share on other sites More sharing options...
FxrAndy Posted July 23, 2009 Report Share Posted July 23, 2009 The excentric adjuster on that movement should work but should only provide about 20 sec a day plus or minus. what have ytou been moving finding a picture and letting us know what you moved may help. Link to comment Share on other sites More sharing options...
signumboy Posted July 23, 2009 Author Report Share Posted July 23, 2009 The excentric adjuster on that movement should work but should only provide about 20 sec a day plus or minus. what have ytou been moving finding a picture and letting us know what you moved may help. The + and the - marker has a small screw bellow I've ajusted it from the middle all the way to the left aprox 90 degrees and it made no difference. picture borrowed from RG Link to comment Share on other sites More sharing options...
spa Posted August 11, 2009 Report Share Posted August 11, 2009 The + and the - marker has a small screw bellow I've ajusted it from the middle all the way to the left aprox 90 degrees and it made no difference. picture borrowed from RG late reply but if you haven't solved your problem yet: you need to get access to the lever marked as "A" in the photo and adjust from there first. (I'd recommend before you adjust the "A" level set the +-adjusting screw to its middle position...This will give you "space" to work while fine tuning later on...) to do this u need to remove the winding rotor and its gear assembly underneath (1 screw for the rotor plus other 3 screws for the assembly under it...can't recall its name...). Then you adjust the "A" lever till you get within +-10 secs / day or so. (just a slight move of the lever should do it). From there you can fine tune it using the +- adjusting screw that you mentioned. Regards. Link to comment Share on other sites More sharing options...
signumboy Posted August 14, 2009 Author Report Share Posted August 14, 2009 thanks for replys I've been away on hols and wore it for most of the time and its keeping excelant time. with plenty of wrist time its out by about 1 second per day, but if left unworn this moves to about 10 secs per day. Link to comment Share on other sites More sharing options...
P4GTR Posted August 14, 2009 Report Share Posted August 14, 2009 could just be the position you leave it resting in. Try resting it upside down from the normal position you would put it in. Link to comment Share on other sites More sharing options...
P_Diddy Posted August 15, 2009 Report Share Posted August 15, 2009 that sounds 'complicated' and quite likely to f**k up. late reply but if you haven't solved your problem yet: you need to get access to the lever marked as "A" in the photo and adjust from there first. (I'd recommend before you adjust the "A" level set the +-adjusting screw to its middle position...This will give you "space" to work while fine tuning later on...) to do this u need to remove the winding rotor and its gear assembly underneath (1 screw for the rotor plus other 3 screws for the assembly under it...can't recall its name...). Then you adjust the "A" lever till you get within +-10 secs / day or so. (just a slight move of the lever should do it). From there you can fine tune it using the +- adjusting screw that you mentioned. Regards. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted August 15, 2009 Report Share Posted August 15, 2009 needs oil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now