billy_bunter Posted July 22, 2009 Report Share Posted July 22, 2009 Hello all, I've done quite a bit of searching both here and on the web but I can't find any useful info so I thought I'd throw it over to some of the experts on the forum! I would like to remove the date function from a movement as it will be used in a no-date watch. Is there any way of making it so that it only has one "click" when the crown/stem is pulled out?(rather than 1st click for date, 2nd for time setting) I am going to be using a 4813 as I want the 28800 bph, so alternatively is there a movement that offers the smooth sweep with auto and no date?! TIA Link to comment Share on other sites More sharing options...
Francisco Posted July 23, 2009 Report Share Posted July 23, 2009 Hello all, I've done quite a bit of searching both here and on the web but I can't find any useful info so I thought I'd throw it over to some of the experts on the forum! I would like to remove the date function from a movement as it will be used in a no-date watch. Is there any way of making it so that it only has one "click" when the crown/stem is pulled out?(rather than 1st click for date, 2nd for time setting) I am going to be using a 4813 as I want the 28800 bph, so alternatively is there a movement that offers the smooth sweep with auto and no date?! TIA I think this this mod may be possible.... but very difficult. Red arrow in next figure shows that there is a pin that engages in an arm with three postions / holes (winding, date, set time). If you can eliminate the central position (where red arrows points to) the mod is done. But...how? The picture is for a 7750. Francisco Link to comment Share on other sites More sharing options...
Wayward Posted July 23, 2009 Report Share Posted July 23, 2009 Hello all, I've done quite a bit of searching both here and on the web but I can't find any useful info so I thought I'd throw it over to some of the experts on the forum! I would like to remove the date function from a movement as it will be used in a no-date watch. Is there any way of making it so that it only has one "click" when the crown/stem is pulled out?(rather than 1st click for date, 2nd for time setting) I am going to be using a 4813 as I want the 28800 bph, so alternatively is there a movement that offers the smooth sweep with auto and no date?! TIA Really not worth the hassle. Link to comment Share on other sites More sharing options...
billy_bunter Posted July 23, 2009 Author Report Share Posted July 23, 2009 Hmmm. Thanks, maybe I should just look for a hi-beat dateless auto... any suggestions? Link to comment Share on other sites More sharing options...
ubiquitous Posted July 23, 2009 Report Share Posted July 23, 2009 ETA makes a lever that eliminates that stop. If you're working with an ETA movement, that would be the solution. Or simply file down that notch to eliminate that position. Stilty's done this job before... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now