Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Adding a Regulator to the A7750 28800


Recommended Posts

INTRODUCTION.

The Asian 7750 movement, a clone of the ETA 7750, has no precision accuracy regulator. This regulator helps to obtain a better adjustment easily. However, this is not so important. With the A7750, without this precision regulator, it is possible to obtain good adjustment.

The problem arises with watches where the case back is transparent. In these cases, it is very easy to detect that the watch is a replica. For example, the Hublot Bing Bang. In the webpage of Hublot there is a small tuto for distinguishing a replica, and the regulator is one of the main points to look for. A picture from this website:

fakebig4ww2.jpg

One of the solutions is to employ an Asian 7750 working at 21600 bph. However, this movement seems to be more problematic that the version working at 28800, with has no regulator. On the other hand, there is a new version of Asian 7750 at 28800 with has a regulator. However, this new movement is still not present in the Hublot replicas and probably is going to be more expensive.

In this small tuto we show how to add a regulator to an Asian 77500 at 28800, using genuine parts of the ETA 7750.

MATERIALS.

Link to comment
Share on other sites

Your tutorials are really excellent, especially with the photos! :)

Thanks a lot, I might well try this for my Tag Heuer Carrera. With a display caseback the missing regulator is obvious.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up