pilot Posted October 11, 2009 Report Share Posted October 11, 2009 Hey Folks, I'm in need of a dial to fit my new style datejust, it has a DG2813 movement. Any ideas? I'd also like to swap the movement for a 4813, anyone know where i can find one with the correct tube size? Kindest Regards Ross Link to comment Share on other sites More sharing options...
alligoat Posted October 13, 2009 Report Share Posted October 13, 2009 1. Buy a cheap $50-60 DJ rep and use that dial- it'll have an asian 21j movt and same dial feet. 2. Buy a gen dial, cut off the dial feet and glue it to the movt ring or use dial dots- this might require a longer pinion- could be tough. 3. Buy a watch from a dealer and see if he'll sell you the DJ dial you want. 4. Just buy the DJ you want from Ruby. Ruby will source/make any DJ you want- you might have to go to RWI to find Ruby. Get the 4813 while you're at it. swapping to a 4813- might require the taller pinion. You could check w/ Chris at Eurotimez, maybe he could help you. In the long run, now that I think of it, it will probably be quicker and easier to just buy the watch you want from a dealer. Link to comment Share on other sites More sharing options...
theblueprince Posted October 13, 2009 Report Share Posted October 13, 2009 Good advice ^^^ above. Swiss ETA DJ's are only about $200 from dealers and they can get you any combination of dial, bezel, bracelet etc that you could want. Also, there are loads of gen dials on Ebay, see what takes your fancy if you're prepared to do some work... Link to comment Share on other sites More sharing options...
jmb Posted October 13, 2009 Report Share Posted October 13, 2009 Pilot, kinda confused as to exactly what you are wanting to do. Is it safe to assume you already have a Datejust with a 2813 movement and would like to get a different dial for it or you have one minus dial? Also, you would like to change to a 4813 movement? Eurotimez has the proper tall cannon (I'm told) 4813 you'll need and TBP is correct about gen dials are pretty common on flea-bay. Or, I am fixin' to order myself some more rep dials and if you can tell me what you are looking for I'll include it in my order if you are CONUS and would only cost you $10-$15. I actually put my order in last night but can probably add a dial to it. Alligoat is correct about it being probably easier to buy another cheapie unless you are wanting to play and get experience. Link to comment Share on other sites More sharing options...
pilot Posted October 13, 2009 Author Report Share Posted October 13, 2009 Hi Folks, The watch is pretty well made but the dial is not pretty so want to change it out, the movement lasted just over a year and will want replacing asap as its constantly stopping. Other than that its mighty fine for a cqout Link to comment Share on other sites More sharing options...
alligoat Posted October 13, 2009 Report Share Posted October 13, 2009 Yeh, you might give some serious consideration to upgrading. It doesn't make much sense to do 50 pounds worth of work to a cheap watch. Or just go buy another 33 pound watch and hope it lasts another year. By the time you get a dial, and a 4813 and put it all together and realize it may or may not work..., you could have just ponied up and got a new watch. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now