landwomble Posted January 27, 2010 Report Share Posted January 27, 2010 Guys, what's the best way of getting some scratches out of the brushed metal bits on a Narikaa PO rep? I've tried the rough side of dishwashing pads and it's not enough. Any suggestions anyone? Link to comment Share on other sites More sharing options...
fakemaster Posted January 28, 2010 Report Share Posted January 28, 2010 Rouge and a buffing wheel. Link to comment Share on other sites More sharing options...
lanikai Posted January 28, 2010 Report Share Posted January 28, 2010 Brush fiberglass pen.. Watch bitz has them.. it refinishes your brushed finish.. I use it periodically on my UOP bracelet.. if your in the EU cousins also has them.. you can also use a "pen eraser".. but make sure your stokes are even.. it's best to use "one way' strokes.. the pen eraser takes out light scratches very nicely.. the fiberglass refinishing pen makes them look new again.. This is a vintage Doxa that had been pretty scratched up.. used the pen to refinish it. go here to view the brush on Ofrei>Here Link to comment Share on other sites More sharing options...
amptor Posted January 28, 2010 Report Share Posted January 28, 2010 Hey that fiberglass pen works great. After reading this post, I remembered that I had an automotive pen. So although I can't find the pen I found the refills and I took one and touched up the bracelet on my 007 seamaster. Seems to work pretty good. Should be able to purchase one of these types of pens at any automotive store or section in stores like walmart and target. Link to comment Share on other sites More sharing options...
landwomble Posted January 28, 2010 Author Report Share Posted January 28, 2010 Brush fiberglass pen.. Watch bitz has them.. it refinishes your brushed finish.. I use it periodically on my UOP bracelet.. if your in the EU cousins also has them.. you can also use a "pen eraser".. but make sure your stokes are even.. it's best to use "one way' strokes.. the pen eraser takes out light scratches very nicely.. the fiberglass refinishing pen makes them look new again.. This is a vintage Doxa that had been pretty scratched up.. used the pen to refinish it. go here to view the brush on Ofrei>Here Well, what do you know? Got one of these I'm my car toolbox for treeatibg surface rust: tried it out and it works great! Thanks! Link to comment Share on other sites More sharing options...
lanikai Posted January 28, 2010 Report Share Posted January 28, 2010 Well, what do you know? Got one of these I'm my car toolbox for treeatibg surface rust: tried it out and it works great! Thanks! Yes,.. they are made to clean light rust off metal surfaces.. they also work well to turn rep gator straps to a matte finish.. tried it on my rep gator.. comes out very nice.. Link to comment Share on other sites More sharing options...
danza1812 Posted January 29, 2010 Report Share Posted January 29, 2010 I use an abrasive block called garryflex. really good. Makes my smp clasp look brand new. Link to comment Share on other sites More sharing options...
FxrAndy Posted January 29, 2010 Report Share Posted January 29, 2010 Have a look here and in there is also a link to another Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now