omgiv Posted February 21, 2010 Report Share Posted February 21, 2010 Hi Guys, I am contemplating a future 6263 project and am trying to decide how deep to jump in. I know that I don't want to spend an arm and a leg but do want a quality and fairly accurate spcimen. I was thinking of going with a DW case kit and probably a Valjoux 72 movement. I might have a source for a movement but was wondering if it is hugely noticeable using a V72 and not a V726 or V727. The only difference I can tell in the 72 and 726 is the beat increase. Maybe somebody knows more about it than I do (I am hoping so). I haven't really seen what the price differences are between a V72 and V726 either. Maybe that would be the deciding factor. Anyway, I was just wondering if it would be a good quality rep with a DW case kit and standard V72 movement. Thanks in advance!!!! Link to comment Share on other sites More sharing options...
Rolexaddict Posted February 21, 2010 Report Share Posted February 21, 2010 Hi Guys, I am contemplating a future 6263 project and am trying to decide how deep to jump in. I know that I don't want to spend an arm and a leg but do want a quality and fairly accurate spcimen. I was thinking of going with a DW case kit and probably a Valjoux 72 movement. I might have a source for a movement but was wondering if it is hugely noticeable using a V72 and not a V726 or V727. The only difference I can tell in the 72 and 726 is the beat increase. Maybe somebody knows more about it than I do (I am hoping so). I haven't really seen what the price differences are between a V72 and V726 either. Maybe that would be the deciding factor. Anyway, I was just wondering if it would be a good quality rep with a DW case kit and standard V72 movement. Thanks in advance!!!! Link to comment Share on other sites More sharing options...
ken fingerlove Posted February 21, 2010 Report Share Posted February 21, 2010 The other* difference between the 72 and the 727 is the microstella balance, which is visibly cool, but not going to make anyone think the movement is genuine. Anyone who opens the back of the watch will know straight away that the movement is not Rolex, unless you spend a fortune. There's a whole 727 and DW case kit in the classifieds right now. * if the beats are different in the two, which I didn't know. Link to comment Share on other sites More sharing options...
freddy333 Posted February 21, 2010 Report Share Posted February 21, 2010 Unless a knowledgeable watchmaker or collector opens your case & closely inspects your movement, no one will know whether you have a standard V72 or a gen Rolex-modded V7xx in there. Link to comment Share on other sites More sharing options...
omgiv Posted February 22, 2010 Author Report Share Posted February 22, 2010 Thanks for the advice guys!!!! Link to comment Share on other sites More sharing options...
mellus Posted February 22, 2010 Report Share Posted February 22, 2010 There's a whole 727 and DW case kit in the classifieds right now. Starter Kit for a 6263-Project There's a whole 727 and DW case kit in the classifieds right now. Starter Kit for a 6263-Project Link to comment Share on other sites More sharing options...
omgiv Posted February 26, 2010 Author Report Share Posted February 26, 2010 Sorry to bring this thread back up, but I was wondering if anyone has used a 72C or 730 in a Daytona. I wondering if the additional calendar mechanism makes the movement too thick. One site says the 72 is 6.25mm in thickness and the 72C 6.95m. I have seen some go for reasonable prices and there is a nice 730 on eBay right now. The 730 is a great choice because it has the 21,600 beat and also has a triovis regulator. Just wondering how open my options would be. Thanks!!!! Link to comment Share on other sites More sharing options...
freddy333 Posted February 26, 2010 Report Share Posted February 26, 2010 It depends entirely on the case you are trying to install the movement into. I doubt a V72x with calendar components will fit into either a gen 62xx or DW case, which is the benchmark for aftermarket Daytona cases around here. I would assume that you will be needing to remove the calendar components prior to final assembly. Link to comment Share on other sites More sharing options...
omgiv Posted February 26, 2010 Author Report Share Posted February 26, 2010 Thanks Freddy! I will keep my eyes out for a 72 or 726 then. Thanks again! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now