Drulee Posted March 13, 2010 Report Share Posted March 13, 2010 Couple of quick and dirty (or dusty in this case) shots. Just need to finish up the CG pin on this 036B with The Zigmeister's "TSWISST" and "Tritium like" lumed dial, Swiss Incabloc 6497 with sunburst cogs, very thick AR-free sapphire, older style titanium case, B series style ti CG, more accurate display back with larger OP lettering, ti T48, and lovely Heroic18 Navy Green Gator. I also have a couple other PAM 036B builds, nearly finished, one with LSWISSL dial, and the other with an older DSN TSWISST dial (that I'm debating whether to get The Zigmeister lumed). Link to comment Share on other sites More sharing options...
w0lf Posted March 13, 2010 Report Share Posted March 13, 2010 Doc, looking good, where did you source that CG? Is it the stock old cartel one that came with the case? Link to comment Share on other sites More sharing options...
Drulee Posted March 13, 2010 Author Report Share Posted March 13, 2010 Doc, looking good, where did you source that CG? Is it the stock old cartel one that came with the case? I bought a bunch of Ti manual winds (around 7 of them ), and managed to get three of these CGs. One went on my 082, another went onto one of the other 036Bs I've been building, and the third went on this one. I also had to do a little lever switching to get one that closed nicely on the T crown. As for where those manual winds came from, all from RG/RWG members - mostly members who came back onto the forum just to sell their purchases from a few years back. So, yes, I would say that they are old stock cartel CGs. Link to comment Share on other sites More sharing options...
prdubis Posted March 13, 2010 Report Share Posted March 13, 2010 Really really nice one!!!! I have a Ti case with back engravings: OP6513 and EE number, is it accurate for a 036? And why DSN cases have one more number on the third lug? Link to comment Share on other sites More sharing options...
Drulee Posted March 13, 2010 Author Report Share Posted March 13, 2010 Really really nice one!!!! I have a Ti case with back engravings: OP6513 and EE number, is it accurate for a 036? And why DSN cases have one more number on the third lug? The OP number is right, but the EE number is wrong, it should be a BB number (BB980nnn). There should also be a third Bnnn/200 serial number on the opposite side, which mine doesn't have either. I believe DSN is the only one who made cases with all three number etched on the three corners. Link to comment Share on other sites More sharing options...
Eton Posted March 13, 2010 Report Share Posted March 13, 2010 One word...SWEET!!! Link to comment Share on other sites More sharing options...
StormTooper4 Posted March 14, 2010 Report Share Posted March 14, 2010 Nice Link to comment Share on other sites More sharing options...
ewing Posted March 15, 2010 Report Share Posted March 15, 2010 very nice! where did the crystal came from? :-) Link to comment Share on other sites More sharing options...
Drulee Posted March 15, 2010 Author Report Share Posted March 15, 2010 very nice! where did the crystal came from? :-) It came from the first 036 I bought, from a member on RG. I had figured it was probably mineral, but then I bought a diamond tester and verified that it was sapphire. The first 036 had a DSN "Orange markers" dial, CG that had a bad case of over-sanding, display back with thin lettering, wrong shock assembly (Novodiac), and unpolished cogs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now