unkul Posted August 22, 2010 Report Share Posted August 22, 2010 I have been modding my cg and the screws or screw holes have got stripped. Absolutly gutted. What is my best plan of action to sort this. Tia Quote Link to comment Share on other sites More sharing options...
nix Posted August 22, 2010 Report Share Posted August 22, 2010 I had a 111h sourced from Sead and it came with one stripped CG screw. I thought it was the case that was stripped, but Sead said it was most likely the screws and he sent me 2 new screws. They went in perfectly.. so it seems the screws are usually the culprit. (over tightening) Try contacting your dealer for some extra CG screws and see if that works. Quote Link to comment Share on other sites More sharing options...
panerai153 Posted August 23, 2010 Report Share Posted August 23, 2010 generally, and I say this because it isn't always the case, the screw is softer than the stainless steel case body. I have found this in the case of threaded lug bars. The screw threads will strip before the lug threads. So I would follow the advice of the poster above, get a few extra screws from your dealer. If the screw holes are stripped out on the case, then I would suspect your only alternative is to recut the threads and try to find a screw that will work. Quote Link to comment Share on other sites More sharing options...
flex Posted August 23, 2010 Report Share Posted August 23, 2010 Panatime sells CG screws. http://www.panatime.com/scallsc.html Quote Link to comment Share on other sites More sharing options...
StormTooper4 Posted August 23, 2010 Report Share Posted August 23, 2010 Get some springbars they are much easier and less hassel all round Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.