Brightight Posted October 14, 2010 Report Share Posted October 14, 2010 I have a Sea Dweller case in which I've been asked to fit a new dial. However the two SD dials I have are approx 26.51mm diameter and don't fit the case. A Sub dial which fits the case is 29.02mm. I guess these are different rep versions, but which is which as I obviously need to obtain a 29mm dial for this case? Does anyone have any info? Quote Link to comment Share on other sites More sharing options...
alligoat Posted October 14, 2010 Report Share Posted October 14, 2010 26.5mm sounds like a 1665 dial. Gen Submariner 16800/16610 is 27.3mm According to Yuki, a 16660 Sea Dweller dial is 27.3 also Rep sub dials are typically 28mm+ Noob sub dial just came up 28.08mm on my chinese calipers. 29mm is big. Maybe a noob SD dial would be in the 28+ range Quote Link to comment Share on other sites More sharing options...
JoeyB Posted October 14, 2010 Report Share Posted October 14, 2010 The blank ETA 28xx dials from Otto Frei that I've been using say they are 28.5mm, though I measure them at 28.3mm. They fit in rep 16610, 16710, 5508, and the 6542 case I bought from you. Quote Link to comment Share on other sites More sharing options...
Brightight Posted October 14, 2010 Author Report Share Posted October 14, 2010 Yes 28.5mm would do the trick, the smaller ones leave a gap round the rehaut. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.