concepta Posted January 13, 2011 Report Share Posted January 13, 2011 Have anyone put a gen Explorer 1 dial in a rep case? If so what movement were used? Link to comment Share on other sites More sharing options...
ubiquitous Posted January 13, 2011 Report Share Posted January 13, 2011 Not a gen dial in a rep case, but I have fitted a gen dial in a gen 16200 case: Fitted with a 2824-2... Since the gen case set came complete, the crown, crystal and bezel all have the benefit of being gen as well. Fairly easy build to do, especially if you have one of stilty's rings... Link to comment Share on other sites More sharing options...
alligoat Posted January 13, 2011 Report Share Posted January 13, 2011 When you have a rep case, the rep dial needs to be around 28mm. If the rep dial is 29mm, a gen dial probably won't fit in the case. A rep case typically is engineered for a 2836-2 or the DG2813 movement. Link to comment Share on other sites More sharing options...
concepta Posted January 13, 2011 Author Report Share Posted January 13, 2011 Great! Thanks for the info guys! Link to comment Share on other sites More sharing options...
rosnik Posted January 13, 2011 Report Share Posted January 13, 2011 I suggest (IMO ): best is to find a rare 12892 Eta ( so you not need movement spacer )it's same that 2892 but same 3135 Rolex calibre . Not: Domi, in my DJ used GEN dial feet to fix dial too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now