Racer686 Posted January 15, 2011 Report Share Posted January 15, 2011 Once I got my 236 on my wrist, I knew it was a keeper. So I sent it to The Zigmeister to get a full service and relume. The watch is from the new batch that has a "too green" colour to the markers and numerals. The Zigmeister was great to deal with and I really appreciate him taking care of me Here are his comments about the watch (Remember this is a week old watch, which show the quality of assembly from the "factory"): Pam 236 1. Watch previously worked on - excessive silicone on caseback and stem - cleaned - correct amount applied (From when watch was QC'd and waterproofed by dealer) 2. dial lume - all markers and subdials painted with tritec reflective white paint - required to cover the green before luming dial lume C3 A+ hands lume C3 A+ 3. movement completely disassembled - reasonably clean, partially oiled - cleaned/inspected - cannon loose - fixed - some wear noticeable in mainplate stem bushing - likely cause no lube and not clean before installation - wear doesn't affect operation - hairspring not concentric in flat - fixed - beat and rate adjusted and timed 3 positions 4.Repaired centre transfer gear located in 30 min counter, had too much end shake. It was disengaging during reset. Dial washer added to take up slack. Tested Multiple times. Here are before and after pix as well as some lume shots (I have no idea how to take one properly). Natural light charges the dial like you would not believe. You find yourself staring at your watch in the shade because it lights up incredibly! Before After 5 second charge with pen light and photo taken on 'no flash' mode of my camera: Quote Link to comment Share on other sites More sharing options...
pabler Posted January 15, 2011 Report Share Posted January 15, 2011 Fantastic watch, mate, wish I had the funds. So here we can see clearly this movements need quick cleaning and adjusting. Quote Link to comment Share on other sites More sharing options...
PeteM Posted January 15, 2011 Report Share Posted January 15, 2011 Rob always does great work and his skills are unrivalled.... Congrats wear it well, I had Rob do similar stuff for me but why didnt you get him to do the CG feet and pin while he had it ?? Quote Link to comment Share on other sites More sharing options...
Racer686 Posted January 15, 2011 Author Report Share Posted January 15, 2011 Rob always does great work and his skills are unrivalled.... Congrats wear it well, I had Rob do similar stuff for me but why didnt you get him to do the CG feet and pin while he had it ?? I didn't know there was an issue? Quote Link to comment Share on other sites More sharing options...
PeteM Posted January 15, 2011 Report Share Posted January 15, 2011 I didn't know there was an issue? While Rob had it he could of got the CG legs flush to case and flattened the pin hole and set pin for gen look. Not a big issue mate but while he had it, it would of got the CG sorted properly I cant see your lever properly but if like most it isnt completely flush he could of sorted that too... Dont get me wrong mate I am just being picky looks fine the way it is...just remarking on the opportunity while Rob had it. Quote Link to comment Share on other sites More sharing options...
hackR Posted January 15, 2011 Report Share Posted January 15, 2011 my 000 was lumed by Rob - the tritec white paint and the A+ lume is simply amazing... wear it well... Quote Link to comment Share on other sites More sharing options...
babola Posted January 15, 2011 Report Share Posted January 15, 2011 While Rob had it he could of got the CG legs flush to case and flattened the pin hole and set pin for gen look. Not a big issue mate but while he had it, it would of got the CG sorted properly I cant see your lever properly but if like most it isnt completely flush he could of sorted that too... Dont get me wrong mate I am just being picky looks fine the way it is...just remarking on the opportunity while Rob had it. You just had to do it, didn't ya... Quote Link to comment Share on other sites More sharing options...
dluddy Posted January 15, 2011 Report Share Posted January 15, 2011 You knew he would D Quote Link to comment Share on other sites More sharing options...
PeteM Posted January 15, 2011 Report Share Posted January 15, 2011 my 000 was lumed by Rob - the tritec white paint and the A+ lume is simply amazing... Definitely worth going with the A+ on these given the lumed areas.... You just had to do it, didn't ya... Its your fault....... you shouldnt of lessoned me !!! You knew he would D Ganging up now are you !! Your another one that needs to take some blame....you started it all... ..your the biggest reason of all Quote Link to comment Share on other sites More sharing options...
Eton Posted January 17, 2011 Report Share Posted January 17, 2011 Looks sweet, R always does top notch work!!! Enjoy! Quote Link to comment Share on other sites More sharing options...
StormTooper4 Posted January 17, 2011 Report Share Posted January 17, 2011 Superluminovanice Quote Link to comment Share on other sites More sharing options...
TK471 Posted January 17, 2011 Report Share Posted January 17, 2011 Oh, man! I've got one on the way back, as well. Can't wait!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.