olreon Posted October 4, 2006 Report Share Posted October 4, 2006 hello, i wanted to know if someone could tell me how to mix up the parts (dilutor, varnish, c3 powder) for reluming. should the mixture be more liquid or more thick? do you use all parts or do you only mix up the varnish and the c3 powder? thanks in advance! best wishes olreon Link to comment Share on other sites More sharing options...
RWG Technical Posted October 4, 2006 Report Share Posted October 4, 2006 I put a small amount of poweder in the cup, add a bit of varnish and mix it up until thick like when your nose runs if you have a cold...not too thick, and not too thin, it has to be smooth. Then only as you use it do you add the dilutor and only a small amount to get the lume thick again...too much dilutor and the dilutor will take the paint off the dial, or cause the existing lume on the watch to bubble up and peel off, or stain the dial from the gas that comes from the dilutor... So, powder, some varnish until thick like pea soup, then a small amount of dilutor each time it gets too thick... Make sure you always mix with the glass rod as metal will dissolve and turn the lume black... Good luck and have fun... RG Link to comment Share on other sites More sharing options...
Estaban Posted October 4, 2006 Report Share Posted October 4, 2006 Clearly, this should be left to the pros. Link to comment Share on other sites More sharing options...
Chronus Posted October 4, 2006 Report Share Posted October 4, 2006 I agree, I'll send mine to The Zigmeister or finepics. Anyone else do relumes? Link to comment Share on other sites More sharing options...
dachshund Posted October 5, 2006 Report Share Posted October 5, 2006 The Zigmeister I'm not questioning wheather mixing with a metal rod will cause the lume to turn black, I've read that in other places as well, but if you can't mix the lume with a metal rod, how in the hell can you apply it with a metal oiler without turning the lume black. Link to comment Share on other sites More sharing options...
RWG Technical Posted October 5, 2006 Report Share Posted October 5, 2006 Ziggy I'm not questioning wheather mixing with a metal rod will cause the lume to turn black, I've read that in other places as well, but if you can't mix the lume with a metal rod, how in the hell can you apply it with a metal oiler without turning the lume black. I dont' know, it just kind of dissolves the oiler if you use the oiler to mix it, I guess 'cause your rubbing and mixing it up...whereas when you apply it, your only picking up the lume with the oiler and applying it to the dial, no rubbing involved... It does turn black if you mix with a oiler, but applying it is fine... Don't ask me, I only use the stuff, not design it.... RG Link to comment Share on other sites More sharing options...
bkdc Posted October 5, 2006 Report Share Posted October 5, 2006 I've given up on using the dilutor because of the reasons mentioned by The Zigmeister. I mix my superlume up in small batches. When it's too thick, I mix up another small batch. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now