Trunks817 Posted January 29, 2011 Report Share Posted January 29, 2011 Hello All, I absolutely love the Daytona model but I am unable to afford a real one. The main concern I have is finding a replica that is automatic and has working chronograph functions. I assume the Asian 21j does not have working chrono but I am unsure about the Japanese quarts movement or the other Asian movements. Can anyone help me out? thanks! Link to comment Share on other sites More sharing options...
Mickey Padge Posted January 29, 2011 Report Share Posted January 29, 2011 There are no decent modern Daytona replicas, they are rubbish, the modified A7750 with seconds at 6 WILL fail and stop working, and 21j/quartz options are very poor quality and not accurate at all..... Best best is to go vintage, with one of Spinmasters Rolex 6263 watches, or DW (DW Watch's section on this forum) Oh, welcome to RWG! Link to comment Share on other sites More sharing options...
The Red Baron Posted January 29, 2011 Report Share Posted January 29, 2011 Second that. Go vintage - they look a helluva look nicer and will last you much longer. Spinmaster's builds are phenominal, but not cheap. Link to comment Share on other sites More sharing options...
LeSentier Posted January 29, 2011 Report Share Posted January 29, 2011 Welcome to RWG, If you look for a Daytona, here you go! Cheers, J Link to comment Share on other sites More sharing options...
grifter Posted January 29, 2011 Report Share Posted January 29, 2011 I've got a sec@6 Daytona rep that has been running strong for the last 5 yrs. I just had it serviced for the first time by Zigmeister, and he says it's a keeper. I think it's more luck of the draw. I've chatted with a few others on the various forums who all have had no problems with theirs. In fact, I'm wearing it right now! If you really love it, buy one and send it to Zigmeister for a proper tune-up and inspection. Get it lumed while it's there too! Just be aware that a lot of them have failed... Link to comment Share on other sites More sharing options...
The Red Baron Posted January 29, 2011 Report Share Posted January 29, 2011 Thats a good point - if you love the 116520, get it and immediately send it out Link to comment Share on other sites More sharing options...
Mickey Padge Posted January 29, 2011 Report Share Posted January 29, 2011 The old first versions of the secs@6 used low beat movements, no? And were more reliable as a result. The new ones are pretty much paperweights waiting to happen. I thought The Zigmeister recommended removing the chronograph functions and freezing the seconds at 6, if you wanted it to run long term and reliably? Link to comment Share on other sites More sharing options...
freddy333 Posted January 29, 2011 Report Share Posted January 29, 2011 The 1st generation A7750 used in the earliest secs @ 6 Daytona reps seem to have survived, whereas many/most of the later/current versions suffered high failure rates due to the design's inherent compromises. If your case & rotor looks like the watch in Step 2, then you likely have 1 of the heartier, early watches. I was fortunate to have picked up 1 each of the earliest 116508 & 116520s, both of which have never missed a tick, so to speak Link to comment Share on other sites More sharing options...
Trunks817 Posted January 30, 2011 Author Report Share Posted January 30, 2011 thanks for the welecome and the advice. I will check some spinmasters out. I don't know where to find DW stuff. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now