Kal Vilmer Posted January 31, 2011 Report Share Posted January 31, 2011 Hello!!! Well i didn't get the Pasha, cuz my wife (it's a gift from her) likes the Riviera's better. So....i know there's a review of a Riviera pinned on this same forum but alas, it's from an "apprentice" dealer. Wanted to know if anybody here has bought one? This is the one i'm getting. Anywho, another question, should i order it now or wait until the weekend when Chinese holidays are concluded? http://www.youtube.com/watch?v=h5B0osH1REw Thanks Paco Link to comment Share on other sites More sharing options...
chronoluvvv Posted February 1, 2011 Report Share Posted February 1, 2011 had one for a while with a Chief'd out crystal incredible to look at and ran just as well the crown being glued to the tube was highly unreliable though so SpeedyG spot-welded it for me the 2nd time around Link to comment Share on other sites More sharing options...
Kal Vilmer Posted February 1, 2011 Author Report Share Posted February 1, 2011 had one for a while with a Chief'd out crystal incredible to look at and ran just as well the crown being glued to the tube was highly unreliable though so SpeedyG spot-welded it for me the 2nd time around Thanks for the reply!I ordered one from trustytime.I'll ask them about the issue with the crown. Thanks! Paco Link to comment Share on other sites More sharing options...
txcollector Posted February 1, 2011 Report Share Posted February 1, 2011 I've had one (white face) for years. Very accurate and reliable. I'd wait for then end of CNY. My package is just sitting there waiting to be moved to customs. No use. Link to comment Share on other sites More sharing options...
chiman12 Posted February 1, 2011 Report Share Posted February 1, 2011 Because I bought a rep for the bracelet to put my gen (it came with the rubber strap), I had done a quick comparision and from what I can remember the rep was remarkably accurate. The slightest tells were that the case back engravings weren't as deep, the date wheel font was a little thin, and the bezel screw holes were just a fraction smaller. But a great rep...and build like a tank!!! Link to comment Share on other sites More sharing options...
AstroAvia Posted February 1, 2011 Report Share Posted February 1, 2011 had one for a while with a Chief'd out crystal incredible to look at and ran just as well the crown being glued to the tube was highly unreliable though so SpeedyG spot-welded it for me the 2nd time around What exactly is this issue? I didn't get it. Link to comment Share on other sites More sharing options...
chronoluvvv Posted February 2, 2011 Report Share Posted February 2, 2011 What exactly is this issue? I didn't get it. I'll send ya a couple of broken crowns if ya like Link to comment Share on other sites More sharing options...
Kal Vilmer Posted February 2, 2011 Author Report Share Posted February 2, 2011 I'll send ya a couple of broken crowns if ya like Really....i asked Andrew from "trusty watch guy" and he said that there was no need to weld them. Hmmm should i ask for my money back? Link to comment Share on other sites More sharing options...
txcollector Posted February 2, 2011 Report Share Posted February 2, 2011 Really....i asked Andrew from "trusty watch guy" and he said that there was no need to weld them. Hmmm should i ask for my money back? never had a problem with mine. Link to comment Share on other sites More sharing options...
Kal Vilmer Posted February 2, 2011 Author Report Share Posted February 2, 2011 never had a problem with mine. Thanks for the reassurance TX, did you get your from Andrew as well? They all probably come from the same factory don't they?. Thanks! PAco Link to comment Share on other sites More sharing options...
txcollector Posted February 2, 2011 Report Share Posted February 2, 2011 probably. The construction is very good and really hard to notice any differences from the gen. Link to comment Share on other sites More sharing options...
chronoluvvv Posted February 3, 2011 Report Share Posted February 3, 2011 Really....i asked Andrew from "trusty watch guy" and he said that there was no need to weld them. Hmmm should i ask for my money back? good for you ! I mean if you can't trust a rep dealer, who can ya trust ? Anyway I was speaking from personal experience Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now