ChasR Posted February 10, 2011 Report Share Posted February 10, 2011 Or would I be better replacing. Posted this earlier maybe in the wrong section Dropped my Tag Carrera Calibre16 day date and the bit on the dial round the day date fell off. I looked up on the internet how to remove the "winder" and went about dismantling the watch. Unfortunately I seem to have done something wrong when replacing the "winder" and it wouldn't stay in. watch was still functioning apart from the "winder" staying in, Tried again but then the watch stopped and the "winder" still wouldn't stay in Is it worth repairing and any idea how much Stay in UK if that makes a difference Photo of Gen Link to comment Share on other sites More sharing options...
Lobster Posted February 10, 2011 Report Share Posted February 10, 2011 Not sure what the price of the rep is, but the repairs may cost just as much as the rep or even more. I'd buy a new rep if I was you. Link to comment Share on other sites More sharing options...
txcollector Posted February 10, 2011 Report Share Posted February 10, 2011 when you say winder, do you mean the big rotor in the back? Link to comment Share on other sites More sharing options...
kbh Posted February 10, 2011 Report Share Posted February 10, 2011 Sound like the stem won't stay in. Keyless works issue. If it's a 7750 chrono movement, it would probably be worthwhile to have fixed. Link to comment Share on other sites More sharing options...
redwatch Posted February 10, 2011 Report Share Posted February 10, 2011 I would suggest buying a new one and then using this one to "practice" on. There's no time like the present to start learning to do basic movement repairs Agree with kbh....probably a keyless works issue Link to comment Share on other sites More sharing options...
ChasR Posted February 10, 2011 Author Report Share Posted February 10, 2011 Not sure what the price of the rep is, but the repairs may cost just as much as the rep or even more. I'd buy a new rep if I was you About $300 when you say winder, do you mean the big rotor in the back? I think its called the crown stem Sound like the stem won't stay in. Keyless works issue. If it's a 7750 chrono movement, it would probably be worthwhile to have fixed. It would appear according to the description on the attached link that I have dislocated the castle wheel http://www.pmwf.com/Watches/WatchSchool/WS%2011%20How%20to%20remove%20and%20replace%20a%20watch%20movement/WS%2011%20How%20to%20remove%20and%20replace%20a%20movt.htm Shame as I've only had the watch a few months Link to comment Share on other sites More sharing options...
ChasR Posted February 10, 2011 Author Report Share Posted February 10, 2011 I would suggest buying a new one and then using this one to "practice" on. There's no time like the present to start learning to do basic movement repairs Agree with kbh....probably a keyless works issue Not up with all of the phrases What do you mean by keyless works issue Link to comment Share on other sites More sharing options...
redwatch Posted February 10, 2011 Report Share Posted February 10, 2011 Not up with all of the phrases What do you mean by keyless works issue The keyless works is essentially like a clutch mechanism that works with the crown stem to set the different modes on the watch. You pull out the crown to the first position, and the crown stem moves the keyless works into position to set the date. Then you pull it out one more click and the keyless works moves to allow you to set the time. When removing the crown from the movement, a lot of times, when trying to replace it, you can mis-align it and mess up the keyless works (especially on the A7750 movement which your watch has). It is quite common and it is a very finicky thing to work on. Link to comment Share on other sites More sharing options...
ChasR Posted February 10, 2011 Author Report Share Posted February 10, 2011 The keyless works is essentially like a clutch mechanism that works with the crown stem to set the different modes on the watch. You pull out the crown to the first position, and the crown stem moves the keyless works into position to set the date. Then you pull it out one more click and the keyless works moves to allow you to set the time. When removing the crown from the movement, a lot of times, when trying to replace it, you can mis-align it and mess up the keyless works (especially on the A7750 movement which your watch has). It is quite common and it is a very finicky thing to work on. Seen justasgoods post on the the Align 7750 thread will start by giving that a try, thanks for your detailed reply it's given me a bit more understanding of timepieces and of my limitations Link to comment Share on other sites More sharing options...
Jkay Posted February 10, 2011 Report Share Posted February 10, 2011 It's called a keyless, because unlike ancient timepieces which require a separate key to wind, you can wind modern watches with a key ... hence "keyless" They come apart very easily and probably everyone here has had a watch with a bad keyless works. It in very inexpensive to have fixed unless perhaps you have bent the parts of the keyless, and even then these are not expensive parts. Link to comment Share on other sites More sharing options...
ChasR Posted February 11, 2011 Author Report Share Posted February 11, 2011 Update for what its worth Got the stem to stay in by pressing the small button to its side. Pull out one stop I can change day and date , pull out two stops can change time. Unfortunately everything else has stopped Best leaving it alone as I seem to be doing more damage every time I touch it Link to comment Share on other sites More sharing options...
Jkay Posted February 11, 2011 Report Share Posted February 11, 2011 Contact The Zigmeister, our resident 7750 movement deity. He can service and repair your movement which will keep you happy for at least another 5 years. He has his own Forum here but can be a little elusive, as watch repair is not his main job. He is a stunning craftsman, and is worth tracking down. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now