vlydog Posted February 24, 2011 Report Share Posted February 24, 2011 Does anyone know if the screw-in chrono pushers for a 6263 are the same as the ones used on a 116520? Quote Link to comment Share on other sites More sharing options...
freddy333 Posted February 24, 2011 Report Share Posted February 24, 2011 There were 3 versions of pushers for the 6263, the last version is the same that Rolex uses on current Cosmos. Quote Link to comment Share on other sites More sharing options...
jmb Posted February 24, 2011 Report Share Posted February 24, 2011 Is there a source for "reasonably priced" versions of these? Quote Link to comment Share on other sites More sharing options...
wiesn089 Posted February 24, 2011 Report Share Posted February 24, 2011 I don't think that they are the same. To my knowledge 16520 and 116520 Cosmographs use 24-p402 pushers, while 6263/6265 use 24-p302 pushers. For reference a picture of a 16520 U serial and a 6265 with one modern replacement pusher and an earlier version. You can clearly see that the circular engravings (I don't know a better term in English) are very different. The 24-p402 has two engraved lines at the top of the pusher while the 24-p302 has a single engraved line at the top and one closer to the case (which isn't present on the p402). All modern replacement pushers on 6263/6265 Daytonas look like this, I have never seen one with the same pushers as a 16520 or 116520. CousinsUK has generic 24-p302 which are very good but no 24-p402. Here's a modern 116520, where you can see that they have the same 24-p402 pushers installed. Quote Link to comment Share on other sites More sharing options...
omgiv Posted February 24, 2011 Report Share Posted February 24, 2011 I did a good bit of research in pushers for my 16520 project. Here is the information that I found. The last of the 6263 pushers were indeed 24-P302. The 16520 uses 24-P402 and the latest 116520 uses 24-P502. I don't know what the differences are between the 3 but that is what Rolex is putting on them. If you are trying to get a set of genuine 402's or 502's, get ready to spend about $500 for a new set. I have seen a set of both come up for sale recently and that was the asking price. Quote Link to comment Share on other sites More sharing options...
jmb Posted February 24, 2011 Report Share Posted February 24, 2011 I need some cheap aftermarket ones for a "project". Quote Link to comment Share on other sites More sharing options...
omgiv Posted February 24, 2011 Report Share Posted February 24, 2011 Don't know what kind of project you have in mind but Otto Frei sells a good version. I am sure you could get a set from DW as well. How cheap are we talking? Quote Link to comment Share on other sites More sharing options...
jmb Posted February 24, 2011 Report Share Posted February 24, 2011 Less than the $40+ Otto wants, maybe $10/ea? I got an assortment of cheap ones from Cousins but they are the press-in style... Quote Link to comment Share on other sites More sharing options...
vafarmer70 Posted February 25, 2011 Report Share Posted February 25, 2011 I need some cheap aftermarket ones for a "project". I really am going to have to ride over there and check out some of your "projects" Quote Link to comment Share on other sites More sharing options...
jmb Posted February 25, 2011 Report Share Posted February 25, 2011 Bring yourself on! Mostly what you'll see is a giant mess! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.