If you have a 5512/5513/1680 with a loose bezel. . .

[cjjoyce1]

One of the common things I've read in all the threads about these is people complaining about loose bezels - to the point where some have even said theirs just pops off easily almost un-commanded.

I had one of these too. I decided to take a chance and get one of the Clark 5513 springs. It was only $11.00 plus a few more in shipping, what the heck.

Best thing I've done yet! Not only is my bezel properly tight now, but in order to rotate it easily, I have to push down on it while turning!

If you have the same problem, this may be good news for you!

[FxrAndy]

I have found light crimping/bending of the original spring helps but the clarks spring solution sounds good

[woof*]

Mine is headed to Jmb for his new tension ring. I saw those Clark's on ebay but thought it probably wouldn't work.

Thanks for taking one for the team! I will buy a few of these for future subs.

[cjjoyce1]

I have found light crimping/bending of the original spring helps but the clarks spring solution sounds good

I tried that too and it helped a bit, but not satisfactorily in my case. I have heard others though, who have had good luck doing that so it's still a good try-it-first option.

[cjjoyce1]

I was asked what the difference between these two springs where. I finally had a chance to mic these out and here is what I found

Cartel Spring

ID = 31.00mm

OD = 34.95mm

Thickness = .15mm

Clark Spring

ID = 31.25mm

OD = 35.25mm

Thickness = .17mm

[Ephry73]

Where can one find one of these springs?

E

[RickFlorida]

He go's by "Nostalgia2000 on ebay but say's "Clarks watch parts".   So I think that's how you buy Clark's parts?