Tribal Posted October 14, 2006 Report Share Posted October 14, 2006 (edited) Hello Folks, i have updated my MBW Franken Sub... i took the whole movement of my MBW 1B and transplanted it,in my beloved old MBW-case with Lugholes... Thats the result I like it a lot... The Dial of the MBW 1B is the best i have seen,Datefont is crisp and clear... Edited October 14, 2006 by Tribal Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 14, 2006 Report Share Posted October 14, 2006 Strangely enough, it looks just like it did with the other movement!!! ;) That's the watch I seek. And yours looks great, Tribal. Congrats. The pre-F style of a couple years ago was great. Such a shame I had zero interest in them at the time. *sigh* Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 14, 2006 Author Report Share Posted October 14, 2006 (edited) Strangely enough, it looks just like it did with the other movement!!! ;) That's the watch I seek. And yours looks great, Tribal. Congrats. The pre-F style of a couple years ago was great. Such a shame I had zero interest in them at the time. *sigh* @ Chieftang You see a simple way to get it... By a Modern MBW 1A and a MBW 1b from George, change the whole movement, the bracelet,put a gen tube and crown on it... And you have a great Franken Sub... the best you can sell the 1B after that change.. My Franken Sub had a bad dial,it bothers me a long time.... After i saw Ubi changed it on his franken, i thought... "Why not" it's a quick flip over... And Ubi is right Looks damm good i think... Edited October 14, 2006 by Tribal Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 14, 2006 Report Share Posted October 14, 2006 @ Chieftang You see a simple way to get it... By a Modern MBW 1A and a MBW 1b from George, change the whole movement, the bracelet,put a gen tube and crown on it... And you have a great Franken Sub... the best you can sell the 1B after that change.. But I'll still be missing the lugholes. By the way, what's the difference in movements between the 1A and 1B anyhow? Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 14, 2006 Author Report Share Posted October 14, 2006 (edited) But I'll still be missing the lugholes. By the way, what's the difference in movements between the 1A and 1B anyhow? I think you can't find this case with lugholes anymore.. thats the reason i never sold it.. No difference,the same movement ETA 2836-2... You can by TTK's noobmariner,it's the same watch but Asian movement... It's cheaper but you must flip the Dial and the Datewheel overlay.. Edited October 14, 2006 by Tribal Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted October 14, 2006 Report Share Posted October 14, 2006 You've got the Franken-Subs down to perfection, Tribal! Looks great! Especially with the lug holes! I love it.... Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 14, 2006 Report Share Posted October 14, 2006 I think you can't find this case with ligholes anymore.. thats the reason i never sold it.. No difference,the same movement ETA 2836-2... You can by TTK's noobmariner,it's the same watch but Asian movement... It's cheaper but you must flip the Dial and the Datewheel overlay.. Yep, already have a TTK/TWG noobmariner... 2 actually. Bought a broken one for the dial and datewheel. Now if I can just find someone to sell me an old TW Best or MBW with lug holes I'll be set... If not, you're right, MBW 1A might be the only way to go. And I might not want to wait too long before it is gone too. hehehe Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 14, 2006 Author Report Share Posted October 14, 2006 You've got the Franken-Subs down to perfection, Tribal! Looks great! Especially with the lug holes! I love it.... Many thanks Randy my friend... You've got me the inspiration to change the whole movement... And you are right thats the best thing i could do.... Looks damm good,like yours... A Gen Insert and thats it... Thnaks for Inspiration... i learned a lot from you... Quote Link to comment Share on other sites More sharing options...
haveblue Posted October 16, 2006 Report Share Posted October 16, 2006 Many thanks Randy my friend... You've got me the inspiration to change the whole movement... And you are right thats the best thing i could do.... Looks damm good,like yours... A Gen Insert and thats it... Thnaks for Inspiration... i learned a lot from you... What is the difference between the TW Best Classic case with the lug holes and the MBW 1A case? I let my MBW 1A go a couple of years ago but kept my TW Classic. If I recall correctly the crystal height was higher on the MBW and the case back was thicker. Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 16, 2006 Report Share Posted October 16, 2006 What is the difference between the TW Best Classic case with the lug holes and the MBW 1A case? I let my MBW 1A go a couple of years ago but kept my TW Classic. If I recall correctly the crystal height was higher on the MBW and the case back was thicker. Good question. Tribal has both cases at his disposal, so surely he can fill us in. Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 16, 2006 Author Report Share Posted October 16, 2006 Good question. Tribal has both cases at his disposal, so surely he can fill us in. There where a lot of variations of the TW cases.. The old mbw cases has a little smaller Rehaut,but there are also variations... I think when you compare the latest Twc ase and the mbw case there are no differnces... Look on my frankensub,you see nice deep rehaut,compare with Ubis Sub,i see no differnebces ... Ok Lugholes on mine,The new MBW case has no lugholes and same construction.. Quote Link to comment Share on other sites More sharing options...
haveblue Posted October 16, 2006 Report Share Posted October 16, 2006 There where a lot of variations of the TW cases.. The old mbw cases has a little smaller Rehaut,but there are also variations... I think when you compare the latest Twc ase and the mbw case there are no differnces... Look on my frankensub,you see nice deep rehaut,compare with Ubis Sub,i see no differnebces ... Ok Lugholes on mine,The new MBW case has no lugholes and same construction.. tribal, your combination of the 1A and the 1B is phenomenal!!! i love it !! wear it well my friend....wear it well!!! Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 16, 2006 Report Share Posted October 16, 2006 There where a lot of variations of the TW cases.. The old mbw cases has a little smaller Rehaut,but there are also variations... I think when you compare the latest Twc ase and the mbw case there are no differnces... Look on my frankensub,you see nice deep rehaut,compare with Ubis Sub,i see no differnebces ... Ok Lugholes on mine,The new MBW case has no lugholes and same construction.. So another little tidbit I heard through the grapevine is that the MBW 1A comes from the same factory as the MBW vintage models, while the 1B comes from an entirely different factory.... Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 16, 2006 Author Report Share Posted October 16, 2006 So another little tidbit I heard through the grapevine is that the MBW 1A comes from the same factory as the MBW vintage models, while the 1B comes from an entirely different factory.... Yes,the MBW 1A comes from a other factory than the MBW 1B... I heard it too... Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 16, 2006 Report Share Posted October 16, 2006 I just ordered a 1A... Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 16, 2006 Author Report Share Posted October 16, 2006 I just ordered a 1A... Thats a good choice to become a good Moddingbase... Put the Dial and the datewheel from your TTK Sub on the watch,also the bracelet.. Install Gen Tube and Crown,Gen Insert and you hgave great Frankensub.... But Caution its not so easy to install agen Tub,because you must drill the casehole and retapp.. Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 16, 2006 Report Share Posted October 16, 2006 But Caution its not so easy to install agen Tub,because you must drill the casehole and retapp.. Practice makes perfect. And that's what cheap broken CN subs are for: practice! Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 17, 2006 Author Report Share Posted October 17, 2006 Practice makes perfect. And that's what cheap broken CN subs are for: practice! Yes man... But on the MBW the hole is about 2,5mm and its low on the case... You must drill up in 0,1mm steps,when you don't, you see where you drilled on back of the case... Not like on CN Subs.. Quote Link to comment Share on other sites More sharing options...
By-Tor Posted October 17, 2006 Report Share Posted October 17, 2006 Now that's a deep rehaut. Deeper than a fish tank. Seriously, it looks wonderful. It's actually so good that I'd buy a genuine pearl to finish it off. The current one looks nice... but that would be the final icing on the cake. Keep up the good work! Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 17, 2006 Report Share Posted October 17, 2006 Yes man... But on the MBW the hole is about 2,5mm and its low on the case... You must drill up in 0,1mm steps,when you don't, you see where you drilled on back of the case... Not like on CN Subs.. Hmm... Finding bits in 0.1mm increments from 2.5mm to 2.9mm (whatever the hole size for a 3mm tap is?) could be difficult. I'm not sure I understand the problem you're describing, though. Are you using a hand drill or a drill press to do this? Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 17, 2006 Author Report Share Posted October 17, 2006 Hmm... Finding bits in 0.1mm increments from 2.5mm to 2.9mm (whatever the hole size for a 3mm tap is?) could be difficult. I'm not sure I understand the problem you're describing, though. Are you using a hand drill or a drill press to do this? You must drill up to 2,8mm or 2,9mm ... First time i used my dremel... I think a hand drill will work better... There is more control about the work.. You can get Cobaltdrills in all dimensions... After you have drilled to the right dimensons,you must grind down the hole, that the Tube sits flush on the case... After that retapping... Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 17, 2006 Author Report Share Posted October 17, 2006 Now that's a deep rehaut. Deeper than a fish tank. Seriously, it looks wonderful. It's actually so good that I'd buy a genuine pearl to finish it off. The current one looks nice... but that would be the final icing on the cake. Keep up the good work! Yepp By -Tor,Gen Insert is in the pipeline.... I manage to grind down the Bezel,that the Insert snaps in... I post some pics of the progress... Quote Link to comment Share on other sites More sharing options...
HauteHippie Posted October 17, 2006 Report Share Posted October 17, 2006 Yepp By -Tor,Gen Insert is in the pipeline.... I manage to grind down the Bezel,that the Insert snaps in... I post some pics of the progress... I've wondered about grinding down the bezel rather than the insert myself... Would sure help to have a watch maker's lathe though... Curious to see how you did it. Quote Link to comment Share on other sites More sharing options...
Tribal Posted October 19, 2006 Author Report Share Posted October 19, 2006 I've wondered about grinding down the bezel rather than the insert myself... Would sure help to have a watch maker's lathe though... Curious to see how you did it. you are right with a lathe.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.