Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Remove date mag from bk/wm9 v2?


Guest zeleni kukuruz

Recommended Posts

In the past I've removed cyclopses from a few watches, because aesthetically, I don't like how they break the line of the crystal (where Panerai cyclops' are on the inside of the crystal...) I've not had an issue with the date looking too small without one. Would I remove the cyclops in the future? :pardon: Depends on the watch and how close to the original I wanted it to be. If I had another GMT, then I would probably remove it. On my planned project for a 16800, I'll probably leave it on, just to keep it closer to the original. As for removal, just a matter of de-casing the movement and dial assembly, popping out the crystal from behind, and then using a cigar lighter to heat the glue and you'll be able to push it off with a knife edge. Don't heat the cyclops for long durations (just a few seconds at a time) and don't heat the cyclops while the crystal is still installed (unless you are willing to run the risk of the crystal expanding in the case and then cracking itself from the pressure...) but it really is a simple procedure to perform :good::drinks:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up