sly Posted February 13, 2012 Report Share Posted February 13, 2012 I am waiting on a phong mid case to arrive to finish my project. The problem is i only bought the mid case and i still need a case back for the meantime till i find a gen. Does anybody know which cheap sub i can buy and just use the caseback temporarily. Also if there is someone who has a spare caseback that they are not using please let me know. The measurement i need is 30.80mm diameter on the thread side. Any help would be much appreciated. Thanks Link to comment Share on other sites More sharing options...
Donerix 2.0 Posted February 13, 2012 Report Share Posted February 13, 2012 I have a few 5513 casebacks laying around. I will measure and see if one is the right size. Link to comment Share on other sites More sharing options...
sly Posted February 13, 2012 Author Report Share Posted February 13, 2012 Thank you very much Link to comment Share on other sites More sharing options...
Valty Posted February 13, 2012 Report Share Posted February 13, 2012 It's always a good idea to have the case back from Phong too On my 6263/5, the other case back I've seen (DW, etc.) are just bad compared to Phong Link to comment Share on other sites More sharing options...
sly Posted February 13, 2012 Author Report Share Posted February 13, 2012 It's on the high side and with patience i can get a gen caseback for a little bit more than his price Link to comment Share on other sites More sharing options...
woof* Posted February 13, 2012 Report Share Posted February 13, 2012 Someone, I can't remember who, was in this same spot awhile back. I think only a gen fits, the diameter isn't the problem... I think it's the threads. Ndt, phong have gen threads and most of the reps that were tried didn't . Link to comment Share on other sites More sharing options...
sly Posted February 13, 2012 Author Report Share Posted February 13, 2012 From what i know. The DW 1680 fits in a yuki 1680 case. Link to comment Share on other sites More sharing options...
wiesn089 Posted February 13, 2012 Report Share Posted February 13, 2012 Does a gen case back fit a MBW case? I'm just wondering, the case back of my milsub project seems a little thick as well. Link to comment Share on other sites More sharing options...
bigjule111 Posted February 20, 2012 Report Share Posted February 20, 2012 Hey sly did the rep caseback fit case? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now