Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Handwind Pams


vmsdisc

Recommended Posts

I doing a test on my Pam 111n . Eta Asian 6497 with High beat 21600 bph Full wind on 0n 03/04 9am ...today 9am 48 hour hv past , i still can heard strong click , click click ,click ......

Edited by vmsdisc
Link to comment
Share on other sites

I get 54 hours from Swiss low beat and 51 hours from Asian high beat. But normally I pretty much always wind every morning, which is recommended. You should not let 6497 run completely dry all the time.

Edited by lfovco
Link to comment
Share on other sites

tks fo the advice ...

I get 54 hours from Swiss low beat and 51 hours from Asian high beat. But normally I pretty much always wind every morning, which is recommended. You should not let 6497 run completely dry all the time.

Link to comment
Share on other sites

today .... 06/04 9am 72 hour past frm the first wind .. still going strong click click click click

I doing a test on my Pam 111n . Eta Asian 6497 with High beat 21600 bph Full wind on 0n 03/04 9am ...today 9am 48 hour hv past , i still can heard strong click , click click ,click ......

Link to comment
Share on other sites

Did a test on my serviced 390. (Zigmeister)

wound fully 7/4 2300

stoped 10/4 kl 10.10

59 hours of glorious power!!

Insaine!!

Yes, but did you have "eyes on" it regularly over its final hours. If I were a betting man, accurate time-keeping went out the window around hour 50....

It is not uncommon to have a watch run beyond its reserve, but accurate timekeeping is probably constrained to its published numbers. They simply do not run spot on, and then stop cold. It is a slow gradual death so to speak.

Link to comment
Share on other sites

Yes, but did you have "eyes on" it regularly over its final hours. If I were a betting man, accurate time-keeping went out the window around hour 50....

It is not uncommon to have a watch run beyond its reserve, but accurate timekeeping is probably constrained to its published numbers. They simply do not run spot on, and then stop cold. It is a slow gradual death so to speak.

I did look at it at the end, it was on my wrist all the time. But i will make sure to inspect the final hours closer next time. Thnx for the heads up.

Link to comment
Share on other sites

I took effort to check my watch during this period . When I check again on 06/04 around 7 pm the watch hv stop at 620 pm on the table ...

Yes, but did you have "eyes on" it regularly over its final hours. If I were a betting man, accurate time-keeping went out the window around hour 50....

It is not uncommon to have a watch run beyond its reserve, but accurate timekeeping is probably constrained to its published numbers. They simply do not run spot on, and then stop cold. It is a slow gradual death so to speak.

I did look at it at the end, it was on my wrist all the time. But i will make sure to inspect the final hours closer next time. Thnx for the heads up.

Link to comment
Share on other sites

hmmm maybe i sould re time it again B). It stop 14/04 0045 yesterday . full Wind before i sleep ...

If you are running 81 hours accurately that is the best I have heard on a PAM 6497-1 or 2. I would check it again. You are doing better than multiple reps and gens ever have for me.

Edited by vmsdisc
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up