marlin22 Posted July 18, 2012 Report Share Posted July 18, 2012 I am perplexed, I am being told that there are older Asian made 6497 movements out there with simulated ETA stamp on them. Not a Swisaniese but an Asian clone movement with a Chinese simulated ETA stamp. Has anyone ever seen one, I haven't and I am very curious to see one. If you have one please post a picture of it. Link to comment Share on other sites More sharing options...
w0lf Posted July 18, 2012 Report Share Posted July 18, 2012 Yes, it was the "E" series paneraipanerai engraved ST36 movement sold around 2007. You could see it in many v5 fiddies that were floating around. The stamp was not very legible though and anyone familiar with what ETA markings look like could tell it was a pretty poor attempt. Link to comment Share on other sites More sharing options...
marlin22 Posted July 18, 2012 Author Report Share Posted July 18, 2012 Interesting, I was under the impression that was never replicated, sure would like to see one. Thanks wOlf If someone could put up a picture, I would sure like to add that to the 6497 comparison thread I am putting together. It would be just that much more information to release to the membership. Link to comment Share on other sites More sharing options...
PeteM Posted July 18, 2012 Report Share Posted July 18, 2012 I am sure I recall Vac selling a few of these... in 2009 I did buy one.... but it looked more like a butterfly Not sure if its the same the M is on about... Link to comment Share on other sites More sharing options...
w0lf Posted July 18, 2012 Report Share Posted July 18, 2012 Here's the movt: Courtesy of respective pic owners: http://i1068.photobucket.com/albums/u449/ocramtto/127/IMG_1236.jpg http://i577.photobucket.com/albums/ss219/DefactoM6/IMG_1449.jpg http://i146.photobucket.com/albums/r248/rangers158/012_resize-1.jpg Link to comment Share on other sites More sharing options...
tanya Posted July 18, 2012 Report Share Posted July 18, 2012 You three need a room Link to comment Share on other sites More sharing options...
marlin22 Posted July 18, 2012 Author Report Share Posted July 18, 2012 Thanks wOlf, we can always count on you to come through with the goods!!! Keep the pictures coming with a good image of the replicated ETA crest. Link to comment Share on other sites More sharing options...
Rolexman Posted July 18, 2012 Report Share Posted July 18, 2012 The crest was not replicated. They were called Swissanese movements. The base plate was in fact gen ETA. I owned one back then. Link to comment Share on other sites More sharing options...
FxrAndy Posted July 18, 2012 Report Share Posted July 18, 2012 The first and third picture look to me to be older Unitas 6497-1 with an anchor cock rather than a bridge and would have screws from the side of the base plate to secure the dail rather than the screws freom the back as we see on modern versions Link to comment Share on other sites More sharing options...
w0lf Posted July 18, 2012 Report Share Posted July 18, 2012 You are right Andy, I'm getting a bit rusty on legacy stuff. The movement I was talking about is a different animal, and I think this is the one Marlin is referring to, finally managed to find it: http://www.repgeek.com/showthread.php?t=89467 Link to comment Share on other sites More sharing options...
marlin22 Posted July 18, 2012 Author Report Share Posted July 18, 2012 OK time out, was the stamping replicated or not? I was always under the impression that they were ETA base plates, like DSNs Ultimate Fiddys? On the second set of pictures it looks like an ETA stamp that has been worn down by the pearling process, I know because at first when I would pearl the base plate it would wear it out like that, until I refined the technique and began to use superfine compounds. But it looks like an authentic ETA stamp??? So, is the first set of pictures ETA? The stamp looks to me more inaccurate than the second set of pictures. Link to comment Share on other sites More sharing options...
w0lf Posted July 19, 2012 Report Share Posted July 19, 2012 That's the replicated stamp. No reason for it to be worn out, as you can see they didn't engine turn the main plate so there was no need to replate, just a bad logo replication. Link to comment Share on other sites More sharing options...
marlin22 Posted July 19, 2012 Author Report Share Posted July 19, 2012 Got it, thanks Link to comment Share on other sites More sharing options...
PeteM Posted July 21, 2012 Report Share Posted July 21, 2012 You three need a room Wouldnt be the same without you Big man Link to comment Share on other sites More sharing options...
FxrAndy Posted July 21, 2012 Report Share Posted July 21, 2012 You are right Andy, I'm getting a bit rusty on legacy stuff. The movement I was talking about is a different animal, and I think this is the one Marlin is referring to, finally managed to find it: http://www.repgeek.c...ead.php?t=89467 That whole movement looks a bit poo, it would not be hard for them to replicate the stamp, the finish on the achor bridge is not great and the pearlage looks very rough even after plating, but i think the only way to tell would be to take it apart and comparte it with a known baseplate, remember that a few years ago these swis unitas were cheep as chips and readily available, and there were lots of very old ones basic ones about. Link to comment Share on other sites More sharing options...
tanya Posted July 23, 2012 Report Share Posted July 23, 2012 I love this topic More please Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now