Rolex 16800/16610 case gaskets

[correctime]

Does a gasket o'ring seal parts numbers list exist anywhere ??

Edited August 1, 2012 by correctime

[Ephry73]

Gary @ Clark's has all of the gaskets and part numbers. Send him an email. E

[alligoat]

The caseback gasket is 29-325-10

The gasket under the crystal retainer is 29-337-8

http://www.ebay.com/itm/Crystal-retainer-gaskets-For-Rolex-29-337-8-/230689458140?pt=LH_DefaultDomain_0&hash=item35b629c7dc

I'm still trying to get the 337 gasket to fit under my crystal retainer- I keep stretching it, hoping it will work.

I have no idea what the case tube gaskets are- I just have a bunch left over from installing case tubes.

[correctime]

The caseback gasket is 29-325-10

The gasket under the crystal retainer is 29-337-8

http://www.ebay.com/...=item35b629c7dc

I'm still trying to get the 337 gasket to fit under my crystal retainer- I keep stretching it, hoping it will work.

I have no idea what the case tube gaskets are- I just have a bunch left over from installing case tubes.

Thanks Brother !!

The case back and retaining ring gaskets are the ones I was after.

[correctime]

I presume the 2.7mm crystal gasket is used for the 2mm 16800 crystal too ??

[alligoat]

The crystal assembly for the 16800 and 16610 are the same so the gasket should be the same. Bezel assembly is also the same. Only thing that's slightly changed are the bezel inserts- no more tritium pearls, fonts on numbers change.

[gavidoc]

The crystal assembly for the 16800 and 16610 are the same so the gasket should be the same. Bezel assembly is also the same. Only thing that's slightly changed are the bezel inserts- no more tritium pearls, fonts on numbers change.

Depends on the age of the 16610 and the crystal thickness

2 mm crystals use the 2.7

1.8mm use the 2.5

You need the 2.5 on the 1.8 crystal to have the same magnification as the 2mm crystal. I discovered this when I used a 2.7 on a 1.8 crystal and saw the difference. I then measured the gaskets and found they were different. Both crystals and gaskets were gen

[correctime]

Depends on the age of the 16610 and the crystal thickness

2 mm crystals use the 2.7

1.8mm use the 2.5

You need the 2.5 on the 1.8 crystal to have the same magnification as the 2mm crystal. I discovered this when I used a 2.7 on a 1.8 crystal and saw the difference. I then measured the gaskets and found they were different. Both crystals and gaskets were gen

Great. Thanks for sharing.