PreV box trial n error

[steph_dexter]

i got so into the pre V model after tired with vintage,

after dial trial, strap trial and booklet, its time to start with the box to complete the package

 

this take a loooong time and alot of patience

 

I take a lot of photos to compare, many hours of searching for parts like hinges locally and the magnetic lock

my first came out too thick and the wood work is very poor, its a shame since i used a good teak wood...oh well lesson to learn

 

any after refinement on the drawing, measurement n better size of hinges, finally the bright light appear... still not the perfect one, but its close enough.

This time with cheaper wood: kampfer wood

 

 

 

 

Here are some shots

left is the first, right is the second trial

 

 

 

 

 

second trial in more detail shot

 

 

 

i'll use some wood stain to get the right color for the next step

 

Btw, please share some opinion about this box guys

 

Edited July 17, 2013 by steph_dexter

[EMM]

I've only seen one such box in person, and I was struck by how rough it looked.  I've made a few custom humidors out of the same mahogany wood OP used, and my boxes were a lot smoother and cleaner.

 

The finishing on the Teak box looks a lot like what I remember.

 

I assume you've read this 'risti post on the boxes:

 

http://www.network54.com/Forum/638808/message/1330527764/The+Pre-V+box+post

[steph_dexter]

thnx for the reference EMM

 

little update, just finish laser cut and engrave

 

 

 

 

 

 

 

should i keep it glossy ?

 

 

[B3nj4min3]

Very nice work there. The laser engraving looks really good. I would probably keep the polished (glossy) finish as it contrasts well against the laser engraving.

[markiemark]

you sir, got some skills

looks very nice and very promising!!! 

[steph_dexter]

thnx guys

 

small update: just add the clip

 

 

 

[zhoon1129]

nice I want one!

[esco]

steph_dexter, I gotta say, this is a great attempt!  I wouldn't keep it glossy though, the OEM finish is almost a matte or sand/bead blasted texture.  The clip is also finished in the same texture.

 

Here are some pics I pulled from the web for you.

 

Front

 

Back

 

Detail of engraving

 

Edited July 21, 2013 by dleerious

[steph_dexter]

thnx dleerious

[steph_dexter]

another little update

 

 

 

[StormTooper4]

Very impressive what a great accomplishment

[esco]

Looking better every time!

[w0lf]

I never really wanted a box for my build until now, Dexter. Awesome job!

[Grimlocktime]

SD, can I add one of these to my dial order?

[steph_dexter]

little more update after finish staining etc (haven't install the badge yet)

 

 

 

 

 

 

 

 

 

 

 

 

inspired by gen box's velvet