steph_dexter Posted July 17, 2013 Report Share Posted July 17, 2013 (edited) i got so into the pre V model after tired with vintage, after dial trial, strap trial and booklet, its time to start with the box to complete the package this take a loooong time and alot of patience I take a lot of photos to compare, many hours of searching for parts like hinges locally and the magnetic lock my first came out too thick and the wood work is very poor, its a shame since i used a good teak wood...oh well lesson to learn any after refinement on the drawing, measurement n better size of hinges, finally the bright light appear... still not the perfect one, but its close enough. This time with cheaper wood: kampfer wood Here are some shots left is the first, right is the second trial second trial in more detail shot i'll use some wood stain to get the right color for the next step Btw, please share some opinion about this box guys Edited July 17, 2013 by steph_dexter Link to comment Share on other sites More sharing options...
EMM Posted July 17, 2013 Report Share Posted July 17, 2013 I've only seen one such box in person, and I was struck by how rough it looked. I've made a few custom humidors out of the same mahogany wood OP used, and my boxes were a lot smoother and cleaner. The finishing on the Teak box looks a lot like what I remember. I assume you've read this 'risti post on the boxes: http://www.network54.com/Forum/638808/message/1330527764/The+Pre-V+box+post 1 Link to comment Share on other sites More sharing options...
steph_dexter Posted July 18, 2013 Author Report Share Posted July 18, 2013 thnx for the reference EMM little update, just finish laser cut and engrave should i keep it glossy ? Link to comment Share on other sites More sharing options...
B3nj4min3 Posted July 19, 2013 Report Share Posted July 19, 2013 Very nice work there. The laser engraving looks really good. I would probably keep the polished (glossy) finish as it contrasts well against the laser engraving. Link to comment Share on other sites More sharing options...
markiemark Posted July 19, 2013 Report Share Posted July 19, 2013 you sir, got some skills looks very nice and very promising!!! Link to comment Share on other sites More sharing options...
steph_dexter Posted July 21, 2013 Author Report Share Posted July 21, 2013 thnx guys small update: just add the clip Link to comment Share on other sites More sharing options...
zhoon1129 Posted July 21, 2013 Report Share Posted July 21, 2013 nice I want one! Link to comment Share on other sites More sharing options...
esco Posted July 21, 2013 Report Share Posted July 21, 2013 (edited) steph_dexter, I gotta say, this is a great attempt! I wouldn't keep it glossy though, the OEM finish is almost a matte or sand/bead blasted texture. The clip is also finished in the same texture. Here are some pics I pulled from the web for you. Front Back Detail of engraving Edited July 21, 2013 by dleerious 1 Link to comment Share on other sites More sharing options...
steph_dexter Posted July 22, 2013 Author Report Share Posted July 22, 2013 thnx dleerious Link to comment Share on other sites More sharing options...
steph_dexter Posted August 2, 2013 Author Report Share Posted August 2, 2013 another little update Link to comment Share on other sites More sharing options...
StormTooper4 Posted August 2, 2013 Report Share Posted August 2, 2013 Very impressive what a great accomplishment Link to comment Share on other sites More sharing options...
esco Posted August 2, 2013 Report Share Posted August 2, 2013 Looking better every time! Link to comment Share on other sites More sharing options...
w0lf Posted August 2, 2013 Report Share Posted August 2, 2013 I never really wanted a box for my build until now, Dexter. Awesome job! Link to comment Share on other sites More sharing options...
Grimlocktime Posted August 2, 2013 Report Share Posted August 2, 2013 SD, can I add one of these to my dial order? Link to comment Share on other sites More sharing options...
steph_dexter Posted August 9, 2013 Author Report Share Posted August 9, 2013 little more update after finish staining etc (haven't install the badge yet) inspired by gen box's velvet Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now