Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Help please - remove bracelet from 1680 Red Sub?


rek001

Recommended Posts

HI guys

 

So I bought a vintage Red Sub from Angus, I'm new to vintage Rolex, I absolute love this watch.

 

I have a slim wrist and had to remove as many links as possible, it was difficult, the screws were VERY tight, took me over 1 hour.

I need to remove 1 last link, the screw just won't budge, tried everything - solvents, heat, cold.

 

At this point screw head is getting stripped and I need to stop.

 

So I contacted Angus, he said to send back the bracelet and he would send me another, all for free.

To me "for free" means air mail, so the whole thing will take probably about 6 weeks, which I'm not happy about. I'll have to negotiate something with him. I guess I could wear it on a NATO strap during this process, sigh.

 

Anyway, sorry for noob question but - how do I remove the bracelet from the watch head?

 

There are metal tabs completely covering the spring bar access points between the lugs, on the underside of the watch.

There are lug holes drilled all the way through to outside of lugs.

 

Do I push into one lug hole from the outside of the lug to release the spring bar? I don't want to screw up anything here.

 

Thanks much.

 

Link to comment
Share on other sites

OK thanks so much, good to know I'm not that stupid LOL.

 

And to re-install bracelet, I push the spring bar through the lug holes and it will lock in place?

Link to comment
Share on other sites

Very easy , either use a spring bar remover with a plain end or a big paperclip, depress one side of the springbar, hold tension to move the springbar away from the lug hole. Repeat on the other side. Much easier to remove bracelets on watches with open lugholes.

Link to comment
Share on other sites

One the first tools to buy in this hobby is a good quality spring bar tool, and not one of the cheapo's off ebay.

I bought several cheap ones, and broke them too..until I bought a good one. Ofrei offers either the Bergeon or the same unbranded a little less.

Get a few extra tip sets too. Use the straight pin end for lugholes, and the tiny fork for sel type bracelets. Your watch bracelet worries will be over :)

http://www.ofrei.com/page252.html

 

Link to comment
Share on other sites

Thanks much for replies guys, you are the best!

I'm taking the watch and bracelet to one more jeweler in the city today, maybe he can free that last screw.

So annoying if I have to send the bracelet back to Angus.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up