Ariso Posted January 22, 2014 Report Share Posted January 22, 2014 Hello I have a big problem. After 3-4 times using the stoppwatch function the right stopp pointer isn't on 30. He is a minute to the right on line 1. Someone who could tell me how I can repair this? :/ Quote Link to comment Share on other sites More sharing options...
SSTEEL Posted January 22, 2014 Report Share Posted January 22, 2014 Welcome to the forums Does the hand move slightly as if its loose? It could of been caused by the sharp, fast flyback when resetting if the hand tube is not firmly on its pinion. The only way to correct this is to remove movement, then remove hand, and refit hand in the correct position. This is assuming you have a 7750 movement in there and not a quartz? Quote Link to comment Share on other sites More sharing options...
Ariso Posted January 22, 2014 Author Report Share Posted January 22, 2014 Yes it is a 7750. How I can remove the movement? and how can i bring the hand in the correct position? Is this over a wheel in the back? Quote Link to comment Share on other sites More sharing options...
Mike on a bike Posted January 22, 2014 Report Share Posted January 22, 2014 I would not advise taking apart a A7750 if you are not very experienced and I am sure steel will agree. Keep in mind half the modders do not like messing with these and the other half are just like no way big PIA. Quote Link to comment Share on other sites More sharing options...
ceejay Posted January 22, 2014 Report Share Posted January 22, 2014 If you have no tools or experience, take it to a local watchsmith. It will be a 20-30 minute job for a experienced watchsmith. Without the proper tools or some previous experience then you will ruin your watch. Good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.