Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Gen PO 42mm


jpz5142

Recommended Posts

Guys need your help, I'm not an omega expert so I wanted to make sure it's gen. I'm looking at this gen at a reasonable price ($3,500 with bracelet + gen croc + gen deployment) but wanted to make sure I got the opinion of the community before pulling the trigger.

post-37023-0-29641800-1394134578_thumb.j

post-37023-0-06723700-1394134589_thumb.j

post-37023-0-22749300-1394134600_thumb.j

Link to comment
Share on other sites

Agreed -- price is a bit steep, you should be looking at sub $3.5K.

 

Below $3K is what should trigger your interest.  If it were me, I wouldn't pull the trigger unless it was somewhere around $2500-2800.

Link to comment
Share on other sites

Thanks - guess I'm not so good at finding such good prices. Would it change anyone's opinion to know it is new/unworn? And where does one find good condition 8500s for $3500?

If it's new and unworn then it should have all three cards with matching serial numbers.  If it still has all factory warranty left, then it's a good deal in my opinion.  Especially if it's the 2500D.

 

I just picked up a two month old Gen 2201.50.00 with the 2500D movement.  With shipping etc, I'm into the watch for about $3650.00 and I'm very pleased with that.  There are lots available in the $2700 range but they are years older and have no warranty remaining.

 

Everyone has their own opinion though :)

Link to comment
Share on other sites

Thanks to all for the input. I found a watch at what I'd consider a fair price, $2,800 for a watch with papers, box and all three cards with matching numbers. It is in excellent condition with all links and little to no scratches. I'm not much for warranties as I would not want to send the watch to the repair center to not see it back for many months, would rather use a local watch guy!

Wrist shot to follow when it arrives!

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

3500 can get you one of the new 8500 pro's for that price. I'd pass you're going to pay too much for that piece

 

Really? Where have you seen that? I haven't been able to find a 8500 for anything less than 4200. If I can find a 42mm 8500 for 3500 I'd buy it right now!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up