baltic Posted March 28, 2006 Report Share Posted March 28, 2006 I've got a 7750 mvmt 196 Daylight that's been working fine (followed The Zigmeister's instructions to the letter for past three months) until now. I stopped the chrono and pushed the bottom re-set button today however the chrono second hand and chrono minute counter won't re-set... Any ideas folks? Is this the end of the daylight?? Does it need a new engine??? Link to comment Share on other sites More sharing options...
jonthebhoy Posted March 28, 2006 Report Share Posted March 28, 2006 Did you give it a real hard push so that you got a click? JTB Link to comment Share on other sites More sharing options...
baltic Posted March 28, 2006 Author Report Share Posted March 28, 2006 Yes, it clicks but no movement from either hand. Link to comment Share on other sites More sharing options...
jonthebhoy Posted March 28, 2006 Report Share Posted March 28, 2006 The reliability of these is well documented. Not sure who would be prepared to look at it for you. I know ziggy is scunnered with these. Do you have a watch man locally who doen't mind reps? JTB Link to comment Share on other sites More sharing options...
RWG Technical Posted March 28, 2006 Report Share Posted March 28, 2006 From reading your commnts, I have to assume that the seconds hand does indeed STOP when you press the top pusher, and that you can Start it again by repressing? If the top pusher works and starts and stops the chrono that means the hammer reset spring is most likely broken. Does anything rattle around in the case? If yes, then don't use the watch, as you will damage it. Broken pieces and movements dont' mix. If the top pusher does NOT start and stop the chrono, then the problem is the pusher spring that has come off the pusher arm, less of a problem, but still requires opening the case and fixing it. In either case, it does not mean a new engine, but simply a small fix... RG Link to comment Share on other sites More sharing options...
baltic Posted March 28, 2006 Author Report Share Posted March 28, 2006 Hi The Zigmeister, Aye the top button works fine. There is a rattly sound from the case, so your diagnosis sounds spot on. Link to comment Share on other sites More sharing options...
RWG Technical Posted March 28, 2006 Report Share Posted March 28, 2006 Broken hammer reset spring, DO NOT Manual wind or do anything else, as you risk really damaging the movement. Best to get it looked at by someone. RG Link to comment Share on other sites More sharing options...
dadog13 Posted March 28, 2006 Report Share Posted March 28, 2006 question : is it better from time to time to use the chrono? or is it ok not to use the chrono at all? what can happen if i don't use the chrono at all? i am asking this because i know what can happen if i use the chrono...something that happend to some of the owners of the 196 rep...like baltic! tnx for answering Link to comment Share on other sites More sharing options...
RWG Technical Posted March 28, 2006 Report Share Posted March 28, 2006 I have an old one with the original asian 7750, and it's over 1 year old now. I use the chrono 10 times a day, 3 days a week when I wear the watch, never a problem... If you want to know all the details on this model, plse review my 3 series in the repair and upgrade subforum, under "Ziggy Zone", there is a 3 part series that explains in detail how the 7750 works, once you read this, you will know everything I do about this movement. RG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now