Legend Posted October 21, 2015 Report Share Posted October 21, 2015 Guys, I recently bought a DSN PAM57C and as many of you may know, the titanium crown guard is not exactly the best, in terms of shape and accuracy.I would like to ask where I could buy a more accurate crown guard to replace this one, and whether any of you kind gentlemen are inclined to sell me one please.I would be grateful for any help rendered. Thank you all in advance. Link to comment Share on other sites More sharing options...
mule play Posted October 21, 2015 Report Share Posted October 21, 2015 Perhaps I can suggest a CG from a PAM089? That is another titanium model that may fit your application.http://www.ttw8488.com/index.php?main_page=product_info&cPath=37_51&products_id=10605I don't have any parts, but I do have a working PAM089 should you need any detailed photos to make a determination if it's a fit for you needs.Let me know. Link to comment Share on other sites More sharing options...
rolli Posted October 21, 2015 Report Share Posted October 21, 2015 sead1999 reachable over Repgeek - write PM sead on rwg = Supermirrors - write PM email adress: topproductsinc@yahoo.com sead titanium crown-guard is a A-F serie CG, fits perfect, maybe new case tube would be necessary. i alos have this CG on my 057 case from davidsen. regards rolli Link to comment Share on other sites More sharing options...
Legend Posted October 21, 2015 Author Report Share Posted October 21, 2015 Perhaps I can suggest a CG from a PAM089? That is another titanium model that may fit your application.http://www.ttw8488.com/index.php?main_page=product_info&cPath=37_51&products_id=10605I don't have any parts, but I do have a working PAM089 should you need any detailed photos to make a determination if it's a fit for you needs.Let me know. sead1999 reachable over Repgeek - write PM sead on rwg = Supermirrors - write PM email adress: topproductsinc@yahoo.com sead titanium crown-guard is a A-F serie CG, fits perfect, maybe new case tube would be necessary. i alos have this CG on my 057 case from davidsen. regards rolli Thank you very much guys for your very knowledgable insights and help. I will go do some homework from here. Rolli, when you say a new tube is needed, I assume that the space between crown guard and crown is smaller for the set up?Thank you. Message crafted while wrestling a juvenile crocodile that's unwilling to be captured and made into leather Link to comment Share on other sites More sharing options...
rolli Posted October 21, 2015 Report Share Posted October 21, 2015 Thank you very much guys for your very knowledgable insights and help. I will go do some homework from here. Rolli, when you say a new tube is needed, I assume that the space between crown guard and crown is smaller for the set up?Thank you. Message crafted while wrestling a juvenile crocodile that's unwilling to be captured and made into leatherdavidsen case tubes are too short , his crown-guard lever too long , that's why he snded down the lever and the lock pressure is wrong,because the lever shoves and has no lock pressure snap.it is amateur work.a new longer case tube,. and to enlarge the round recess with a driller or miller, adjust the oem davidsen ti crown with double o-ringon the crown-neck with the tube and lever, and polish down a little bit till the tibe front till the vrown and lever gives a perfect lock pressure with snap effect.don't grind down the lever !!!!!!!all the best rolli Link to comment Share on other sites More sharing options...
mule play Posted October 21, 2015 Report Share Posted October 21, 2015 WOW! Link to comment Share on other sites More sharing options...
imajedi Posted October 21, 2015 Report Share Posted October 21, 2015 Funny, I have the same issue with my 089. CG fit to the case is very gappy. I have removed the CG and strategically filed down the bottoms of the feet which has reduced the gaps but now there only just barely enough room to pull the crown all the way out when setting the time. Still works but jut barely. Link to comment Share on other sites More sharing options...
rolli Posted October 21, 2015 Report Share Posted October 21, 2015 Funny, I have the same issue with my 089. CG fit to the case is very gappy. I have removed the CG and strategically filed down the bottoms of the feet which has reduced the gaps but now there only just barely enough room to pull the crown all the way out when setting the time. Still works but jut barely.to grind down the crown-guard feets is the most worst way to do this modification.new longer tube and to grind down the tube front part till the crown and lever gives the perfect lock pressure snap. regards rolli Link to comment Share on other sites More sharing options...
imajedi Posted October 21, 2015 Report Share Posted October 21, 2015 to grind down the crown-guard feets is the most worst way to do this modification.new longer tube and to grind down the tube front part till the crown and lever gives the perfect lock pressure snap. regards rolli I think you misunderstood my problem. The surface of the CG that mates with the surface of the case, and the surface of the case, were not even close to matching. Large gaps were present where portions of the CG were not contacting the case when the CG was installed. The only way to fix this is either file the CG or the case or get a CG that fits better. My point was you need to be very selective and efficient with your filing so that you don't end up with the CG being too close to the case. Link to comment Share on other sites More sharing options...
Legend Posted October 21, 2015 Author Report Share Posted October 21, 2015 davidsen case tubes are too short , his crown-guard lever too long , that's why he snded down the lever and the lock pressure is wrong,because the lever shoves and has no lock pressure snap.it is amateur work.a new longer case tube,. and to enlarge the round recess with a driller or miller, adjust the oem davidsen ti crown with double o-ringon the crown-neck with the tube and lever, and polish down a little bit till the tibe front till the vrown and lever gives a perfect lock pressure with snap effect.don't grind down the lever !!!!!!!all the best rolli Wow Rolli that's very insightful thank you very sincerely. I'll post the watch when it's all done with a special mention for those who helped this panerai noob out!Message crafted while wrestling a juvenile crocodile that's unwilling to be captured and made into leather Link to comment Share on other sites More sharing options...
rolli Posted October 22, 2015 Report Share Posted October 22, 2015 this is a special tube special made for me.it has a longer front part, longer than from davidsen the tubes. after pressed in the casethe inner tube measure must be fine enlarged with a reamer and control it with the davidsen oem crown ) crown with double o-ring on the neck.after that you have to grind down the tube front part with a corundum rubber wheel, check it with the crown and CG-lever pressure. all the best rolli 1 Link to comment Share on other sites More sharing options...
Legend Posted October 23, 2015 Author Report Share Posted October 23, 2015 this is a special tube special made for me.it has a longer front part, longer than from davidsen the tubes. after pressed in the casethe inner tube measure must be fine enlarged with a reamer and control it with the davidsen oem crown ) crown with double o-ring on the neck.after that you have to grind down the tube front part with a corundum rubber wheel, check it with the crown and CG-lever pressure. all the best rolli Thanks a lot Rolli!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now