horologist Posted December 17, 2015 Report Share Posted December 17, 2015 I have a water damaged replica submariner which has a rusted mvt and would like to replace the mvt. It has a eta 2836-2 mvt. I also have a spare dial and date wheel overlay, but am not sure if it is recommended to get a 2836-2 or a 2824-2 so that I can fit the date wheel overlay without any hidden problems?? I heard rumors that the 2836 Is less problems for this than the eta 2824 but don't really know why. I am very ignorant about this and would appreciate any feedback to which direction I should go???many thanks in advance Link to comment Share on other sites More sharing options...
RickFlorida Posted December 17, 2015 Report Share Posted December 17, 2015 Hello, I'm in the middle of learning this too. Basically the stem height is different. So you should probably stick with the 2836. If you try to switch to 2824 you would have to change a few difficult parts. Link to comment Share on other sites More sharing options...
krpster Posted December 17, 2015 Report Share Posted December 17, 2015 They are not interchangeable so stick with the matching movement to what is in your case now. The movements are virtually identical with the exception of the added day wheel on the 2836. The accompanying extra mechanisms to drive it increase the front side thickness of the movement. So when cased the stem position will not line up correctly. Link to comment Share on other sites More sharing options...
SSTEEL Posted December 17, 2015 Report Share Posted December 17, 2015 Stick with the 2836-2 movement, these have a slightly more stepped date wheel, which is more favourable for DWO fitment/clearance. You would then need a dial spacer the correct depth so that the newly applied DWO doesn't foul the underside of the dial. Link to comment Share on other sites More sharing options...
horologist Posted December 18, 2015 Author Report Share Posted December 18, 2015 Stick with the 2836-2 movement, these have a slightly more stepped date wheel, which is more favourable for DWO fitment/clearance. You would then need a dial spacer the correct depth so that the newly applied DWO doesn't foul the underside of the dial.many thanks!!!!would the dial spacer that comes with the new movement work........or will I need a different sized spacer???? Link to comment Share on other sites More sharing options...
SSTEEL Posted December 18, 2015 Report Share Posted December 18, 2015 If you apply the new DWO correctly, whilst aligning it to display each date central, then you should be fine with the standard dial spacer, yes. Link to comment Share on other sites More sharing options...
horologist Posted December 19, 2015 Author Report Share Posted December 19, 2015 Thank you all above for your responses!! Very helpful to say the least! Saved me from making a costly mistake!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now