danielv2000 Posted July 15, 2016 Report Share Posted July 15, 2016 Hello all. It has been a little while since I've posted. I'm looking for some replacement non-screw down pushers for a DW 6239 case. Can someone point me to a reliable quality source. Much appreciated. Link to comment Share on other sites More sharing options...
alligoat Posted July 16, 2016 Report Share Posted July 16, 2016 That's a tricky deal. As I recall, the DW pushers are like a .20 pitch- 2.5mm and the Ofrei pushers are .25 pitch. So you'd have to retap the case with a 2.5mm x .25 tap (Rolex standard) if you use the Ofrei pushers. And of course you can't get DW pushers these days. Good luck Link to comment Share on other sites More sharing options...
danielv2000 Posted July 16, 2016 Author Report Share Posted July 16, 2016 2 hours ago, alligoat said: That's a tricky deal. As I recall, the DW pushers are like a .20 pitch- 2.5mm and the Ofrei pushers are .25 pitch. So you'd have to retap the case with a 2.5mm x .25 tap (Rolex standard) if you use the Ofrei pushers. And of course you can't get DW pushers these days. Good luck Oh-no! That's not good news. Thanks Link to comment Share on other sites More sharing options...
freddy333 Posted July 16, 2016 Report Share Posted July 16, 2016 Ofrei's 61.701 pushers are what I always use for 62xx non-Oyster Daytonas. Depending on your particular case (all rep/aftermarket case threading varies), you may need to tap the existing hole to make them fit properly or you may need to go 1 step larger in thread size if the existing hole is too large. In my experience, that is just the nature of non-genuine Rolex cases. Link to comment Share on other sites More sharing options...
danielv2000 Posted July 17, 2016 Author Report Share Posted July 17, 2016 4 hours ago, freddy333 said: Ofrei's 61.701 pushers are what I always use for 62xx non-Oyster Daytonas. Depending on your particular case (all rep/aftermarket case threading varies), you may need to tap the existing hole to make them fit properly or you may need to go 1 step larger in thread size if the existing hole is too large. In my experience, that is just the nature of non-genuine Rolex cases. Freddy, thanks. I might try a pair and see what happens. I'm hoping I get lucky and have nothing to adjust. Link to comment Share on other sites More sharing options...
alligoat Posted July 17, 2016 Report Share Posted July 17, 2016 If you go with the Ofrei pushers, it's certainly worth a go with the Rolex tap- 2.5mm x .25 and see if it works. Link to comment Share on other sites More sharing options...
danielv2000 Posted July 19, 2016 Author Report Share Posted July 19, 2016 Well, shipping will cost be more than the pusher. I think I will start with a WTB here first! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now