Would a Poljot 3133 fit a Yuki Monte Carlo Case?

[gasebah]

Thinking about building a Tudor. 7032. Problem is these 7734 movements are becoming rare and more expensive. So I thought about buying a watch with a Poljot 3133 movement that should be almost identical given the fact that the Russians bought all the machinery and tools from Switzerland.

Any ideas? You think it is worth a try? Poljot watches with these movements are out there in abundance and can be had between 80 and 200 € in almost new condition.

Edited October 15, 2016 by gasebah

[Nightwatch]

Interesting idea: here are some specs/comparison/info on the movement: http://www.strela-watch.de/watch_movements/3133-maktime-poljot/

Just posting to follow-up later if this is feasible, stem-height etc.

[gasebah]

Here is an another interesting comparison.  A poster answering in the thread claims that a 7734 dial won't fit the 3310 but does not elaborate as to why. Maybe it is just the dial feet position.

http://forums.watchuseek.com/f54/poljot-3133-vs-valjoux-7734-lysanderxii-224306.html

Edited October 15, 2016 by gasebah

[gasebah]

Too bad. Guess the answer is here: http://watchguy.co.uk/service-poljot-chronograph-calibre-p3133/

Quote: "While quite similar, the Poljot 3133 cannot be substituted for the Valjoux 7734. The Poljot is considerably thicker and dial feet are in a different location."

[Nightwatch]

Ok, so that was short-lived. Still it depends on the caseset itself and which movements it does take, dial feet could be cut off.

[gasebah]

Would be great to have exact dimensions, but did not find anything on the net yet.

[ceejay]

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&2&2uswk&Poljot_3133

 

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&2&2uswk&Valjoux_7734

 

 

[Nanuq]

Jeez ceejay you beat me to it. GMTA.

[ceejay]

It sure is an excellent resource. 

[gasebah]

Thx guys. The height difference kills it I guess.