capre Posted December 17, 2016 Report Share Posted December 17, 2016 Hi,Im looking for a genuine mk 2 long 5 insert and the inserts are different from another. Some are flatter and some are curved for more domed plexi. As seen on this picture:I have experianced that a insert with no "curve" makes the insert sit to snug against a gen service t19 thus making the bezel non turnable. Im planning on using a CWP t19 plexi but i could go for a service t19 aswell if i have to in order to make the insert fit and allowing the bezel to rotate. So my question is if any of you guys have an idea which type of "curve" i should aim for to be able to have a turnable bezel? Would be a shame throwing that kind of funds down for an insert and end up with a fixed bezel. Quote Link to comment Share on other sites More sharing options...
Nanuq Posted December 17, 2016 Report Share Posted December 17, 2016 You can alter the angle yourself. A plate of glass will press it flatter and the neck of a bottle can help you dome it up.Be careful, don't bend it. Quote Link to comment Share on other sites More sharing options...
capre Posted December 17, 2016 Author Report Share Posted December 17, 2016 You can alter the angle yourself. A plate of glass will press it flatter and the neck of a bottle can help you dome it up.Be careful, don't bend it.Thanks for the tip! That makes the choice easy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.