3035 vs 3135?

[Champagnesky]

Hi! Does anyone know if the 3135 has the same dimensions as 3035? I have gen parts for a datejust 16013 build, case, dw, dial, hands. Was thinking about putting a sh3135 into it. Does anyone know if its possible to get the movement separately?

[Ephry73]

No. The 3035 is closer in dimensions to a 2892. 3035 movements are also not cloned yet that I know of.


Sent from my iPhone using Tapatalk

[Champagnesky]

40 minutes ago, Ephry73 said:

No. The 3035 is closer in dimensions to a 2892. 3035 movements are also not cloned yet that I know of.


Sent from my iPhone using Tapatalk

thx for the quick reply. I was completely sure they were the same diameter and height. The info i found on the 3035 was: 

 

Data
12.5''', Dm= 28.1mm, Do= 28.5mm
H= 6.15mm
(rotor stud +0.15mm)
F= 2.05mm
T= 2.15mm
27 jewels
f = 28800 A/h
power reserve 50h

 

Hands
1.40 x 1.00 x 0.18mm

 

 

and the 3135 is a little shorter, cant find any info on stem height etc. hands.

 

 

[tomhorn]

Ephry73 is correct. It won't fit. You would need a 162xx case to use a 3135 (clone or gen).

 

The 3035 is thicker above the stem position, and therefore the 3135 stem will be in the wrong spot to fit your case.

Edited January 31, 2018 by tomhorn

[Ephry73]

Now a 2892 with a custom adapter will fit perfectly and run just as well if not better and save you a few thousand quid. Just a thought.


Sent from my iPhone using Tapatalk

[Champagnesky]

Now a 2892 with a custom adapter will fit perfectly and run just as well if not better and save you a few thousand quid. Just a thought.


Sent from my iPhone using Tapatalk

Thx! You are right, it just felt so good that i Could Do a super clean build without cutting feet and looking for more parts


Skickat från min iPhone med Tapatalk

[Drummania]

2824 fits perfectly, too.


Sent from my iPhone using Tapatalk