Antonio Posted January 16, 2007 Report Share Posted January 16, 2007 Bought a 4 watch winder on ebay. One side of the 2 went out. Took it apart, motor is fine, it's the board that's not sending power to that side. Emailed the seller (bought it 6 months ago) to ask about a new board, but no response. I want to buy it, not asking for them to send me one for free. May buy another or build my own. Anyone have one with a good board but bad motor? -Antonio Link to comment Share on other sites More sharing options...
tvt Posted January 16, 2007 Report Share Posted January 16, 2007 Sorry, I can't help you, but an interesting note about winders. I have had a cheap unit, $100 for a single winder and it has more or less worked flawlessly for 3-4 years. Thsi Christmas I got a $3,000 Orbita three watch winder made out of some sort of beutiful exotic wood and crabon fiber... looks GREAT. the only thing is that of the three winders the middle one spun at half the speed of the other two and could not keep ANY watch wound. SO back it went. It has been gone for 2 weeks and I have not even heard back from them yet. I have every confidence that they will replace it but it goes to show that MUCH more expenisive does not always mean trouble free (though it sure does look pretty). Link to comment Share on other sites More sharing options...
rbj69 Posted January 16, 2007 Report Share Posted January 16, 2007 same thing happened to me , i beleive it was gadgetsbestbuy is who i bought mine from , so what i did was i shaved off the wires of the good side(so there would be a raw spot all the way around the red and black wire) and spliced the wires of the other side(the one that was using the bad side of the board) by basically cutting the white pusher off and had two raw ends and wrapped around the wires on the other side and put electric tape around it to hold them together and now they both work on one side of the board , lol how long it will last only time will tell , if u dont understand what the hek i did , lol just email me and i will try and help u understand ok joe(rbj69) Link to comment Share on other sites More sharing options...
Devedander Posted January 16, 2007 Report Share Posted January 16, 2007 joe I am assuming you splied in parrallel as if you had gone in series your winders would all go half as fast as they should... But in parallel you are drawing twice the amperage through the board... that's the equivalent of putting 5 transfer gears on a 7750... it will be interesting if that all holds up in there under the load... Link to comment Share on other sites More sharing options...
rbj69 Posted January 16, 2007 Report Share Posted January 16, 2007 yeah but i couldnt find a spare board and it was a cheap winder , lol so far so good its been going about a month or so now , no problems so far, i have four winders now so im not too worried , other than that particular one from those guys seems to be the worse one by far , loudest as well , but for now it is running , lol as far as i can tell they run as they did before , just simutaneously now , thats all basically it was just a suggestion instead of tossing it , lol and works fine so far joe Link to comment Share on other sites More sharing options...
sam_tgg Posted January 16, 2007 Report Share Posted January 16, 2007 Check this if you are in EU: Watchwinder Ebay I buzed one for 5 watches for 130 (if you are lucky may be less). I have also a problem with the board. I sent it back, and they send me a new one. It was 3 months old. The service is impresive. And the winder in really good, in super wood. And with the LCD you can controll everything easy. It is a cheap version for us EU members Link to comment Share on other sites More sharing options...
Frontin Posted January 16, 2007 Report Share Posted January 16, 2007 Yeah, these jokers got me too! I have a total of four quad watch winders all from ebay. I think I just might open up the steinhausen and see if I can fix it. If I mess up, there is a small motor repair guy down the street. My latest winder from ebay seller "formsroyal" just went back because a side went out. It was less than 30 days old! same thing happened to me , i beleive it was gadgetsbestbuy is who i bought mine from , so what i did was i shaved off the wires of the good side(so there would be a raw spot all the way around the red and black wire) and spliced the wires of the other side(the one that was using the bad side of the board) by basically cutting the white pusher off and had two raw ends and wrapped around the wires on the other side and put electric tape around it to hold them together and now they both work on one side of the board , lol how long it will last only time will tell , if u dont understand what the hek i did , lol just email me and i will try and help u understand ok joe(rbj69) Link to comment Share on other sites More sharing options...
Usil Posted January 16, 2007 Report Share Posted January 16, 2007 Holy Crap tvt - 3000 USD for a winder - for only three watches??? Surely you mean 300 USD? I thought my watch collection was getting a bit on the high side. I don't feel so bad now. Usil Link to comment Share on other sites More sharing options...
gillorin Posted January 16, 2007 Report Share Posted January 16, 2007 (edited) definitely 3k no way a 3 watch Orbita was only three hundred. They also make the watch winder James Bond would own, a 40 watch model that has a hidden motorized winding panel http://www.orbita.net/pages/12300.htm Edited January 16, 2007 by gillorin Link to comment Share on other sites More sharing options...
tvt Posted January 16, 2007 Report Share Posted January 16, 2007 No, I meant $3,000 however I was also mistaken, it is more like $2,200. STILL, a lot to pay to have it broken upon arrival! Link to comment Share on other sites More sharing options...
Guest avitt Posted January 16, 2007 Report Share Posted January 16, 2007 I recommend that you get new winder, and not try to solder it back together yourself (not that you wouldn't be capable). Remember that these thing are plugged in and spinning 24/7. It'd be pretty sad if is sparked up, and burned your house down... Link to comment Share on other sites More sharing options...
Spatten1 Posted January 16, 2007 Report Share Posted January 16, 2007 I got one of those 4 watch winders off of EBAY from the same guys. Piece of crap gets louder every day. I finally quit using it, it was so noisy I couldn't take it. I even tried to lube the motors, no help at all. My neighbor has one of the Sharper Image ones that rides on bearings, I'd guess with a belt turing the watch holder. It is quiet and works well. Link to comment Share on other sites More sharing options...
gioarmani Posted January 16, 2007 Report Share Posted January 16, 2007 Try these guys: http://www.swisstgallery.com/ Relatively inexpensive, and I've had mine for years with no trouble. The first one I received from them had a scratch, and after emailing them, they actually sent me another 2nd day before I had even mailed the other back (which they paid for). Quite professional; rare that. Link to comment Share on other sites More sharing options...
tvt Posted January 17, 2007 Report Share Posted January 17, 2007 What can I say, I am a sucker for cool looking cases and things of that nature. Check out the winder here: http://www.orbita.net/pages/12360.htm What you cannot see in the photos is that is has carbon fiber panels on the front and top, the wood is REALLY nice and the inside is leather lined. When you have watches in there they sort of look like they are floating in space and the actual winders are all high end, bearing and all and very quiet. Now if I could only get one that works! Now for the ultimate check this out: http://www.orbita.net/pages/12912.htm Link to comment Share on other sites More sharing options...
Sylar Posted January 17, 2007 Report Share Posted January 17, 2007 @GioArmani, Thanks for posting the link for Swiss T. That looks like the route I will be going. Try these guys: http://www.swisstgallery.com/ Relatively inexpensive, and I've had mine for years with no trouble. The first one I received from them had a scratch, and after emailing them, they actually sent me another 2nd day before I had even mailed the other back (which they paid for). Quite professional; rare that. Link to comment Share on other sites More sharing options...
neuhoover Posted January 17, 2007 Report Share Posted January 17, 2007 I don't know... SwissT sounds fishy. I think it's an Asian company either masquarading as an American company, or they have an agent in the US to make it sound legit. Language on the site sounds funny: "The piano gloss is unremarkable." "Production of this hand crafted item takes 30 days so it can be ready for you tomorrow." "If not yet perfect, the front displays 4 additional watches so the entire collection is complete." Sounds like someone's trying to translate something into English. And the winders look awefully simliar to the ones we all get off of Ebay for $100. Anyone have photos of the insides of one? I'd be interested - my eBay special also got so noisy after a year of operation that I had to shut it off. Link to comment Share on other sites More sharing options...
JJFlash Posted January 17, 2007 Report Share Posted January 17, 2007 I believe most of these cheap winders we have are made by the same company in China. They may have different brand names, or sold by different companies, but they look identical. My experience is the same. One or two of each winder on the quad winder has stopped dead. I initally thought the motors burned out, tried to source new motors. Upon complete disassembly it was the circuit board that had gone bad for that module. Impossible to source new circuit board. Oh well, still makes a nice display case. Link to comment Share on other sites More sharing options...
The cack Posted January 17, 2007 Report Share Posted January 17, 2007 http://www.amazon.com/Double-Automatic-Wat...8&s=jewelry If you don't need any bells and whistles, and don't mind the "modern" black and silver look, this little winder is a very god buy. Wife got me one for Christmas and it gets the job done. Can't hear it when it's running unless I put my ear right to it and it looks really nice considering it's plastic.. regards, Jack Link to comment Share on other sites More sharing options...
linkukbora Posted January 17, 2007 Report Share Posted January 17, 2007 http://www.amazon.com/Double-Automatic-Wat...8&s=jewelry If you don't need any bells and whistles, and don't mind the "modern" black and silver look, this little winder is a very god buy. Wife got me one for Christmas and it gets the job done. Can't hear it when it's running unless I put my ear right to it and it looks really nice considering it's plastic.. regards, Jack IS this winder comes with AC 110-220 V adaptor ? Link to comment Share on other sites More sharing options...
The cack Posted January 17, 2007 Report Share Posted January 17, 2007 IS this winder comes with AC 110-220 V adaptor ? It's setup with whatever standard american outlet voltage is...I always get them confused. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now