Romp Posted January 24, 2007 Report Share Posted January 24, 2007 Hey all Anyone experienced a squeak in the links of there ss bracelets? I have an Ingy and two of the links have a squeak when it moves How do I stop the squeak?? Its getting annoying! Thx Link to comment Share on other sites More sharing options...
jonthebhoy Posted January 24, 2007 Report Share Posted January 24, 2007 Ear muffs! Link to comment Share on other sites More sharing options...
Category 5 Posted January 24, 2007 Report Share Posted January 24, 2007 Hey all Anyone experienced a squeak in the links of there ss bracelets? I have an Ingy and two of the links have a squeak when it moves How do I stop the squeak?? Its getting annoying! Thx Oil my friend. WD40 works...so does mineral oil. Link to comment Share on other sites More sharing options...
Romp Posted January 24, 2007 Author Report Share Posted January 24, 2007 Oil my friend. WD40 works...so does mineral oil. Should I oil just the pin? I dont want my bracelet to feel oily when im done Link to comment Share on other sites More sharing options...
Falco Posted January 24, 2007 Report Share Posted January 24, 2007 (edited) 1. toothbrush and paste first whole bracelet, to clean of the factory dirt 2. rinse 3. cape cod to get som gen shine into it 4. rinse 5. wiggle the shine into oil bath (example WD40) for 30 min, wear gloves 6. wash bracelet in luke warm water, no soap 7. polish bracelet after it dried with a soft cloth 8. put bracelet back on watch and have a single malt whiskey (no ice) Edited January 24, 2007 by Falco Link to comment Share on other sites More sharing options...
Romp Posted January 25, 2007 Author Report Share Posted January 25, 2007 1. toothbrush and paste first whole bracelet, to clean of the factory dirt 2. rinse 3. cape cod to get som gen shine into it 4. rinse 5. wiggle the shine into oil bath (example WD40) for 30 min, wear gloves 6. wash bracelet in luke warm water, no soap 7. polish bracelet after it dried with a soft cloth 8. put bracelet back on watch and have a single malt whiskey (no ice) Thanks mate! Link to comment Share on other sites More sharing options...
chronology1066 Posted January 25, 2007 Report Share Posted January 25, 2007 May wash my hands before the nippy sweetie Link to comment Share on other sites More sharing options...
rbj69 Posted January 25, 2007 Report Share Posted January 25, 2007 what i do is buff each link with a buffing wheel, just enough to smooth the edges but not take the brushed finish away (this is a step i do for the rollies mostly) never done a IWC so use precaution and then i put simichrome paste on it or S-100 (u can get it from the harley shops )and rub it in good then i oil it down with wd-40 and then i scrub it in hot soapy water with a soft tooth brush and then i shake it dry and towel dry it and then i blow dry it so there is no water left in between the links to prevent rust joe Link to comment Share on other sites More sharing options...
Falco Posted January 25, 2007 Report Share Posted January 25, 2007 never thought of using a hairdryer on my watch bracelets, good tip. thanks joe Link to comment Share on other sites More sharing options...
Romp Posted January 26, 2007 Author Report Share Posted January 26, 2007 never thought of using a hairdryer on my watch bracelets, good tip. thanks joe Used toothpaste and warm water and brushed all the links well ... not onyl does it look HEAPS better now (not sure why) it also stopped most of the squeaks! Now only a tiny squeak. Do u only apply the WD 40 the the pins? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now