Hands foul batons on gen dial

[Choongi]

I am using a clone ETA 2824-2 movement and purchased a genuine dial, unfortunately the hands foul on the genuine dial batons.

Is there an easy fix?

[automatico]

Swiss and etaclone 2824 movements have hands mounted close to the dial making the minute and sometimes the sweep second hand hit the hour markers.

The fix is a 'hand height kit'...

 

HAND HEIGHT KIT FOR MOVEMENT ETA 2824-2: HH1, HH2, HH3, HH4, HH5, HH6 | eBay

 

Sometimes there is a catch hidden in this fix because on some watches, the sweep second hand will rub a flat sapphire crystal.  The fix for this is to use a taller crystal gasket made for a 16610 submariner...on 36mm DJ cases.  Rolex 16610 and 162xx DJ use the same crystal, only the gasket is different. 

I am not familiar with oversize DJ 41 etc.

 

 

[torobravo]

The critical fits for compatibility are the  hour and minute hands of  the dial, often they  won´t fit due the .mm difference on the gen

[freddy333]

Auto outlined the less expensive long road. The short (though more expensive) road would be to fit the gen dial to a gen movement & handset, or swap the gen dial for a rep dial.
It all depends on your goal, patience level & bank account.