Tom Posted February 9, 2007 Report Posted February 9, 2007 I want to open this and obviously don't the correct tool for removing the bezel on the Big Bang. Does anyone know what is called and where I can get one that small. Can I fashion one out of something else? Even my smallest screwdrivers won't fit and I am worried about sratching the surface.
Guest RiverwindMDS Posted February 9, 2007 Report Posted February 9, 2007 Why do you want to do so? By the way, I think you should take a normal screwdriver and make a hole in the center of it...
Tom Posted February 9, 2007 Author Report Posted February 9, 2007 Why do you want to do so? By the way, I think you should take a normal screwdriver and make a hole in the center of it... Hello Marco - still loving the watch. All I want to do is alighn them so they all face the same way. It is anal I know but I want to do it - I don't actually want to remove the bezel. I wish someone made a rep box for this beauty.
Guest RiverwindMDS Posted February 9, 2007 Report Posted February 9, 2007 Mee too, I want a rep box, also because they are so beautiful... For the screws also the gens are not aligned.
rbj69 Posted February 10, 2007 Report Posted February 10, 2007 u may want to ask the dealer u got if from r they glue in or real screws, that way u dont mess one up joe
flavor flav Posted February 10, 2007 Report Posted February 10, 2007 u may want to ask the dealer u got if from r they glue in or real screws, that way u dont mess one up joe very good point! it would be a shame to mess up that beauty!
lovepanerai Posted February 10, 2007 Report Posted February 10, 2007 try a springbar tool. thanks for the tip - works great u may want to ask the dealer u got if from r they glue in or real screws, that way u dont mess one up joe I got mine from Angus and yes they are real screws - I just tried
bigmouth Posted February 10, 2007 Report Posted February 10, 2007 try a springbar tool. I tried this very carefully and it worked! Did not "allign" it but tightened up the screws. They were quite loose. Also tightened up the screws on the back with my "panerai" screwdriver.
bertieng Posted February 10, 2007 Report Posted February 10, 2007 My advice is not to try to unscrew those screws coz their threads are not in good shapes. Some of them can be loosen up but will not pop off the hole. If you try to pull it out with a plier then you will ruin the rim of the screw. Take my words coz I have messed up some of them already. DON'T TAKE THE RISK!!!!!!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now